a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
/*
* Copyright (C) 2016 Frits Kuipers
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_maple-mini
* @{
*
* @file
* @brief Peripheral MCU configuration for the maple-mini board
*
* @author Frits Kuipers <frits.kuipers@gmail.com>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock system configuration
* @{
**/
/* high speed clock configuration:
* 0 := use internal HSI oscillator (always 8MHz)
* HSE frequency value := use external HSE oscillator with given freq [in Hz]
* must be 4000000 <= value <= 16000000 */
#define CLOCK_HSE (8000000U)
/* low speed clock configuration:
* 0 := use internal LSI oscillator (~40kHz)
* 1 := use extern LSE oscillator, always 32.768kHz */
#define CLOCK_LSE (0)
/* targeted system clock speed [in Hz], must be <= 72MHz */
#define CLOCK_CORECLOCK (72000000U)
/* PLL configuration, set both values to zero to disable PLL usage. The values
* must be set to satisfy the following equation:
* CORECLOCK := CLOCK_SOURCE / PLL_DIV * PLL_MUL
* with
* 1 <= CLOCK_PLL_DIV <= 2
* 2 <= CLOCK_PLL_MUL <= 17 */
#define CLOCK_PLL_DIV (1)
#define CLOCK_PLL_MUL (9)
/* AHB and APBx bus clock configuration, keep in mind the following constraints:
* ABP1 <= 36MHz
*/
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
/** @} */
/**
* @name ADC configuration
* @{
*/
#define ADC_NUMOF (0)
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_1_ISR isr_tim3
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.bus = APB2,
.irqn = USART1_IRQn
},
{
.dev = USART3,
.rcc_mask = RCC_APB1ENR_USART3EN,
.rx_pin = GPIO_PIN(PORT_B, 11),
.tx_pin = GPIO_PIN(PORT_B, 10),
.bus = APB1,
.irqn = USART3_IRQn
}
};
#define UART_0_ISR isr_usart2
#define UART_1_ISR isr_usart1
#define UART_2_ISR isr_usart3
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (2U)
#define I2C_0_EN 1
#define I2C_1_EN 0
#define I2C_IRQ_PRIO 1
#define I2C_APBCLK (CLOCK_APB1)
/* I2C 0 device configuration */
#define I2C_0_DEV I2C1
#define I2C_0_CLKEN() (RCC->APB1ENR |= RCC_APB1ENR_I2C1EN)
#define I2C_0_CLKDIS() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
#define I2C_0_EVT_IRQ I2C1_EV_IRQn
#define I2C_0_EVT_ISR isr_i2c1_ev
#define I2C_0_ERR_IRQ I2C1_ER_IRQn
#define I2C_0_ERR_ISR isr_i2c1_er
/* I2C 0 pin configuration */
#define I2C_0_SCL_PIN GPIO_PIN(PORT_B, 6) /* D15 */
#define I2C_0_SDA_PIN GPIO_PIN(PORT_B, 7) /* D16 */
/* I2C 1 device configuration */
#define I2C_1_DEV I2C2
#define I2C_1_CLKEN() (RCC->APB1ENR |= RCC_APB1ENR_I2C2EN)
#define I2C_1_CLKDIS() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
#define I2C_1_EVT_IRQ I2C2_EV_IRQn
#define I2C_1_EVT_ISR isr_i2c2_ev
#define I2C_1_ERR_IRQ I2C2_ER_IRQn
#define I2C_1_ERR_ISR isr_i2c2_er
/* I2C 1 pin configuration */
#define I2C_1_SCL_PIN GPIO_PIN(PORT_B, 10) /* D1 */
#define I2C_1_SDA_PIN GPIO_PIN(PORT_B, 11) /* D0 */
/** @} */
/**
* @brief Shared SPI clock div table
*
* @note The spi_divtable is auto-generated from
* `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
*/
static const uint8_t spi_divtable[2][5] = {
{ /* for APB1 @ 36000000Hz */
7, /* -> 140625Hz */
6, /* -> 281250Hz */
4, /* -> 1125000Hz */
2, /* -> 4500000Hz */
1 /* -> 9000000Hz */
},
{ /* for APB2 @ 72000000Hz */
7, /* -> 281250Hz */
7, /* -> 281250Hz */
5, /* -> 1125000Hz */
3, /* -> 4500000Hz */
2 /* -> 9000000Hz */
}
};
/**
* @name SPI configuration
* @{
*/
static const spi_conf_t spi_config[] = {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
},
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = GPIO_UNDEF,
.rccmask = RCC_APB1ENR_SPI2EN,
.apbbus = APB1
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
|