a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
/*
* Copyright (C) 2014-2015 Freie Universitรคt Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup cpu_sam3
* @ingroup drivers_periph_uart
* @{
*
* @file
* @brief Low-level UART driver implementation
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*
* @}
*/
#include "cpu.h"
#include "board.h"
#include "periph/uart.h"
#include "periph/gpio.h"
#define ENABLE_DEBUG (0)
#include "debug.h"
/**
* @brief Allocate memory to store the callback functions.
*/
static uart_isr_ctx_t ctx[UART_NUMOF];
int uart_init(uart_t uart, uint32_t baudrate, uart_rx_cb_t rx_cb, void *arg)
{
Uart *dev;
/* make sure given device is valid */
if (uart >= UART_NUMOF) {
return UART_NODEV;
}
/* get base register */
dev = uart_config[uart].dev;
/* register callback */
ctx[uart].rx_cb = rx_cb;
ctx[uart].arg = arg;
/* enable clock */
uart_poweron(uart);
/* reset configuration */
dev->UART_CR = 0;
dev->UART_IDR = 0x0000ffff;
/* configure pins */
gpio_init_mux(uart_config[uart].tx_pin, uart_config[uart].mux);
if (rx_cb) {
gpio_init_mux(uart_config[uart].rx_pin, uart_config[uart].mux);
}
/* configure baud rate and set mode to 8N1 */
dev->UART_BRGR = (CLOCK_CORECLOCK / (16 * baudrate));
dev->UART_MR = UART_MR_PAR_NO | US_MR_CHRL_8_BIT;
if (rx_cb) {
dev->UART_CR = UART_CR_RXEN | UART_CR_TXEN | UART_CR_RSTSTA;
NVIC_EnableIRQ(uart_config[uart].irqn);
dev->UART_IER = UART_IER_RXRDY;
}
else {
dev->UART_CR = UART_CR_TXEN | UART_CR_RSTSTA;
}
return UART_OK;
}
void uart_write(uart_t uart, const uint8_t *data, size_t len)
{
Uart *dev = uart_config[uart].dev;
for (size_t i = 0; i < len; i++) {
while (!(dev->UART_SR & UART_SR_TXRDY)) {}
dev->UART_THR = data[i];
}
}
void uart_poweron(uart_t uart)
{
PMC->PMC_PCER0 |= (1 << uart_config[uart].pmc_id);
}
void uart_poweroff(uart_t uart)
{
PMC->PMC_PCER0 &= ~(1 << uart_config[uart].pmc_id);
}
static inline void isr_handler(int num)
{
Uart *dev = uart_config[num].dev;
if (dev->UART_SR & UART_SR_RXRDY) {
ctx[num].rx_cb(ctx[num].arg, (uint8_t)dev->UART_RHR);
}
cortexm_isr_end();
}
#ifdef UART_0_ISR
void UART_0_ISR(void)
{
isr_handler(0);
}
#endif
#ifdef UART_1_ISR
void UART_1_ISR(void)
{
isr_handler(1);
}
#endif
#ifdef UART_2_ISR
void UART_2_ISR(void)
{
isr_handler(2);
}
#endif
#ifdef UART_3_ISR
void UART_3_ISR(void)
{
isr_handler(3);
}
#endif
|