a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
/*
* Copyright (C) 2016 Freie Universitรคt Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @defgroup drivers_w5100 W5100 ethernet driver
* @ingroup drivers_netdev
* @brief Driver for W5100 ethernet devices
*
* This device driver only exposes the MACRAW mode of W5100 devices, so it does
* not offer any support for the on-chip IPv4, UDP, and TCP capabilities of
* these chips. In connection with RIOT we are only interested in the RAW
* Ethernet packets, which we can use through netdev with any software network
* stack provided by RIOT (e.g. GNRC). This enables W5100 devices to communicate
* via IPv6, enables unlimited connections, and more...
*
* @note This driver expects to be triggered by the external interrupt
* line of the W5100 device. On some Arduino shields this is not
* enabled by default, you have to close the corresponding solder
* bridge to make it work...
*
* @{
*
* @file
* @brief Interface definition for the W5100 device driver
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef W5100_H
#define W5100_H
#include <stdint.h>
#include "periph/spi.h"
#include "periph/gpio.h"
#include "net/netdev.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief W5100 error codes
*/
enum {
W5100_ERR_BUS = -1,
};
/**
* @brief W5100 device descriptor
*/
typedef struct {
spi_t spi; /**< SPI bus used */
spi_clk_t clk; /**< clock speed used on the selected SPI bus */
gpio_t cs; /**< pin connected to the chip select line */
gpio_t evt; /**< pin connected to the INT line */
} w5100_params_t;
/**
* @brief Device descriptor for W5100 devices
*/
typedef struct {
netdev_t nd; /**< extends the netdev structure */
w5100_params_t p; /**< device configuration parameters */
} w5100_t;
/**
* @brief So the initial device setup
*
* This function pre-initializes the netdev structure, saves the configuration
* parameters and finally initializes the SPI bus and the used GPIO pins.
*/
void w5100_setup(w5100_t *dev, const w5100_params_t *params);
#ifdef __cplusplus
}
#endif
#endif /* W5100_H */
/* @} */
|