/*
               LUFA Library

       Copyright (C) Dean Camera, 2010.

  
    dean [at] fourwalledcubicle [dot] com

        www.fourwalledcubicle.com

  */
  
  /*

    Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  
    Permission to use, copy, modify, distribute, and sell this
    software and its documentation for any purpose is hereby granted
    without fee, provided that the above copyright notice appear in
    all copies and that both that the copyright notice and this
    permission notice and warranty disclaimer appear in supporting
    documentation, and that the name of the author not be used in
    advertising or publicity pertaining to distribution of the
    software without specific, written prior permission.
  

    The author disclaim all warranties with regard to this

    software, including all implied warranties of merchantability
    and fitness.  In no event shall the author be liable for any
    special, indirect or consequential damages or any damages
    whatsoever resulting from loss of use, data or profits, whether
    in an action of contract, negligence or other tortious action,
    arising out of or in connection with the use or performance of
    this software.
  */
  
  /** \file
   *

   *  Main source file for the USBtoSerial project. This file contains the main tasks of

   *  the demo and is responsible for the initial application hardware configuration.
   */
  

  #include "USBtoSerial.h"
  
  /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
  RingBuff_t USBtoUSART_Buffer;
  
  /** Circular buffer to hold data from the serial port before it is sent to the host. */
  RingBuff_t USARTtoUSB_Buffer;

  
  /** LUFA CDC Class driver interface configuration and state information. This structure is
   *  passed to all CDC Class driver functions, so that multiple instances of the same class
   *  within a device can be differentiated from one another.
   */
  USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
  	{
  		.Config =
  			{

  				.ControlInterfaceNumber         = 0,

  				.DataINEndpointNumber           = CDC_TX_EPNUM,
  				.DataINEndpointSize             = CDC_TXRX_EPSIZE,
  				.DataINEndpointDoubleBank       = false,
  
  				.DataOUTEndpointNumber          = CDC_RX_EPNUM,
  				.DataOUTEndpointSize            = CDC_TXRX_EPSIZE,
  				.DataOUTEndpointDoubleBank      = false,

  				.NotificationEndpointNumber     = CDC_NOTIFICATION_EPNUM,
  				.NotificationEndpointSize       = CDC_NOTIFICATION_EPSIZE,
  				.NotificationEndpointDoubleBank = false,
  			},
  	};

  
  /** Main program entry point. This routine contains the overall program flow, including initial
   *  setup of all components and the main program loop.
   */
  int main(void)
  {
  	SetupHardware();
  

  	RingBuffer_InitBuffer(&USBtoUSART_Buffer);
  	RingBuffer_InitBuffer(&USARTtoUSB_Buffer);

  
  	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

  	sei();

  
  	for (;;)
  	{

  		/* Read bytes from the USB OUT endpoint into the USART transmit buffer */
  		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
  		if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))
  		  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
  
  		/* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
  		RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
  		if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
  		{
  			TIFR0 |= (1 << TOV0);
  
  			/* Read bytes from the USART receive buffer into the USB IN endpoint */
  			while (BufferCount--)
  			  CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));
  		}
  
  		/* Load the next byte from the USART transmit buffer into the USART */
  		if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer)))
  		  Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer));

  
  		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
  		USB_USBTask();
  	}
  }
  
  /** Configures the board hardware and chip peripherals for the demo's functionality. */
  void SetupHardware(void)
  {

  	/* Disable watchdog if enabled by bootloader/fuses */
  	MCUSR &= ~(1 << WDRF);
  	wdt_disable();
  
  	/* Disable clock division */
  	clock_prescale_set(clock_div_1);

  
  	/* Hardware Initialization */

  	LEDs_Init();
  	USB_Init();

  	/* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
  	TCCR0B = (1 << CS02);

  }
  
  /** Event handler for the library USB Connection event. */
  void EVENT_USB_Device_Connect(void)
  {
  	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
  }
  
  /** Event handler for the library USB Disconnection event. */
  void EVENT_USB_Device_Disconnect(void)
  {
  	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
  }
  
  /** Event handler for the library USB Configuration Changed event. */
  void EVENT_USB_Device_ConfigurationChanged(void)
  {
  	bool ConfigSuccess = true;
  
  	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
  
  	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
  }
  

  /** Event handler for the library USB Unhandled Control Request event. */
  void EVENT_USB_Device_UnhandledControlRequest(void)

  {
  	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
  }
  

  /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
   *  for later transmission to the host.
   */
  ISR(USART1_RX_vect, ISR_BLOCK)
  {
  	uint8_t ReceivedByte = UDR1;
  
  	if (USB_DeviceState == DEVICE_STATE_Configured)
  	  RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte);
  }
  
  /** Event handler for the CDC Class driver Line Encoding Changed event.

   *
   *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
   */

  void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)

  {

  	uint8_t ConfigMask = 0;
  
  	switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
  	{
  		case CDC_PARITY_Odd:
  			ConfigMask = ((1 << UPM11) | (1 << UPM10));
  			break;
  		case CDC_PARITY_Even:
  			ConfigMask = (1 << UPM11);
  			break;
  	}
  
  	if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits)
  	  ConfigMask |= (1 << USBS1);
  
  	switch (CDCInterfaceInfo->State.LineEncoding.DataBits)
  	{
  		case 6:
  			ConfigMask |= (1 << UCSZ10);
  			break;
  		case 7:
  			ConfigMask |= (1 << UCSZ11);
  			break;
  		case 8:
  			ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
  			break;
  	}
  
  	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
  	UCSR1B = 0;
  	UCSR1A = 0;
  	UCSR1C = 0;
  
  	/* Set the new baud rate before configuring the USART */
  	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
  
  	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
  	UCSR1C = ConfigMask;
  	UCSR1A = (1 << U2X1);
  	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

  }