//
//  Vivado(TM)
//  ISEWrap.js: Vivado Runs Script for WSH 5.1/5.6
//  Copyright 1986-1999, 2001-2013,2015 Xilinx, Inc. All Rights Reserved. 
//

// GLOBAL VARIABLES
var ISEShell = new ActiveXObject( "WScript.Shell" );
var ISEFileSys = new ActiveXObject( "Scripting.FileSystemObject" );
var ISERunDir = "";
var ISELogFile = "runme.log";
var ISELogFileStr = null;
var ISELogEcho = true;
var ISEOldVersionWSH = false;



// BOOTSTRAP
ISEInit();



//
// ISE FUNCTIONS
//
function ISEInit() {

  // 1. RUN DIR setup
  var ISEScrFP = WScript.ScriptFullName;
  var ISEScrN = WScript.ScriptName;
  ISERunDir = 
    ISEScrFP.substr( 0, ISEScrFP.length - ISEScrN.length - 1 );

  // 2. LOG file setup
  ISELogFileStr = ISEOpenFile( ISELogFile );

  // 3. LOG echo?
  var ISEScriptArgs = WScript.Arguments;
  for ( var loopi=0; loopi<ISEScriptArgs.length; loopi++ ) {
    if ( ISEScriptArgs(loopi) == "-quiet" ) {
      ISELogEcho = false;
      break;
    }
  }

  // 4. WSH version check
  var ISEOptimalVersionWSH = 5.6;
  var ISECurrentVersionWSH = WScript.Version;
  if ( ISECurrentVersionWSH < ISEOptimalVersionWSH ) {

    ISEStdErr( "" );
    ISEStdErr( "Warning: ExploreAhead works best with Microsoft WSH " +
	       ISEOptimalVersionWSH + " or higher. Downloads" );
    ISEStdErr( "         for upgrading your Windows Scripting Host can be found here: " );
    ISEStdErr( "             http://msdn.microsoft.com/downloads/list/webdev.asp" );
    ISEStdErr( "" );

    ISEOldVersionWSH = true;
  }

}

function ISEStep( ISEProg, ISEArgs ) {

  // CHECK for a STOP FILE
  if ( ISEFileSys.FileExists(ISERunDir + "/.stop.rst") ) {
    ISEStdErr( "" );
    ISEStdErr( "*** Halting run - EA reset detected ***" );
    ISEStdErr( "" );
    WScript.Quit( 1 );
  }

  // WRITE STEP HEADER to LOG
  ISEStdOut( "" );
  ISEStdOut( "*** Running " + ISEProg );
  ISEStdOut( "    with args " + ISEArgs );
  ISEStdOut( "" );

  // LAUNCH!
  var ISEExitCode = ISEExec( ISEProg, ISEArgs );  
  if ( ISEExitCode != 0 ) {
    WScript.Quit( ISEExitCode );
  }

}

function ISEExec( ISEProg, ISEArgs ) {

  var ISEStep = ISEProg;
  if (ISEProg == "realTimeFpga" || ISEProg == "planAhead" || ISEProg == "vivado") {
    ISEProg += ".bat";
  }

  var ISECmdLine = ISEProg + " " + ISEArgs;
  var ISEExitCode = 1;

  if ( ISEOldVersionWSH ) { // WSH 5.1

    // BEGIN file creation
    ISETouchFile( ISEStep, "begin" );

    // LAUNCH!
    ISELogFileStr.Close();
    ISECmdLine = 
      "%comspec% /c " + ISECmdLine + " >> " + ISELogFile + " 2>&1";
    ISEExitCode = ISEShell.Run( ISECmdLine, 0, true );
    ISELogFileStr = ISEOpenFile( ISELogFile );

  } else {  // WSH 5.6

    // LAUNCH!
    ISEShell.CurrentDirectory = ISERunDir;

    // Redirect STDERR to STDOUT
    ISECmdLine = "%comspec% /c " + ISECmdLine + " 2>&1";
    var ISEProcess = ISEShell.Exec( ISECmdLine );
    
    // BEGIN file creation
    var wbemFlagReturnImmediately = 0x10;
    var wbemFlagForwardOnly = 0x20;
    var objWMIService = GetObject ("winmgmts:{impersonationLevel=impersonate, (Systemtime)}!//./root/cimv2");
    var processor = objWMIService.ExecQuery("SELECT * FROM Win32_Processor", "WQL",wbemFlagReturnImmediately | wbemFlagForwardOnly);
    var computerSystem = objWMIService.ExecQuery("SELECT * FROM Win32_ComputerSystem", "WQL", wbemFlagReturnImmediately | wbemFlagForwardOnly);
    var NOC = 0;
    var NOLP = 0;
    var TPM = 0;

    var cpuInfos = new Enumerator(processor);
    for(;!cpuInfos.atEnd(); cpuInfos.moveNext()) {
        var cpuInfo = cpuInfos.item();
        NOC += cpuInfo.NumberOfCores;
        NOLP += cpuInfo.NumberOfLogicalProcessors;
    }
    var csInfos = new Enumerator(computerSystem);
    for(;!csInfos.atEnd(); csInfos.moveNext()) {
        var csInfo = csInfos.item();
        TPM += csInfo.TotalPhysicalMemory;
    }

    var ISEHOSTCORE = NOLP
    var ISEMEMTOTAL = TPM

    var ISENetwork = WScript.CreateObject( "WScript.Network" );
    var ISEHost = ISENetwork.ComputerName;
    var ISEUser = ISENetwork.UserName;
    var ISEPid = ISEProcess.ProcessID;
    var ISEBeginFile = ISEOpenFile( "." + ISEStep + ".begin.rst" );
    ISEBeginFile.WriteLine( "<?xml version=\"1.0\"?>" );
    ISEBeginFile.WriteLine( "<ProcessHandle Version=\"1\" Minor=\"0\">" );
    ISEBeginFile.WriteLine( "    <Process Command=\"" + ISEProg + 
			    "\" Owner=\"" + ISEUser + 
			    "\" Host=\"" + ISEHost + 
			    "\" Pid=\"" + ISEPid +
			    "\" HostCore=\"" + ISEHOSTCORE +
			    "\" HostMemory=\"" + ISEMEMTOTAL +
			    "\">" );
    ISEBeginFile.WriteLine( "    </Process>" );
    ISEBeginFile.WriteLine( "</ProcessHandle>" );
    ISEBeginFile.Close();
    
    var ISEOutStr = ISEProcess.StdOut;
    var ISEErrStr = ISEProcess.StdErr;
    
    // WAIT for ISEStep to finish
    while ( ISEProcess.Status == 0 ) {
      
      // dump stdout then stderr - feels a little arbitrary
      while ( !ISEOutStr.AtEndOfStream ) {
        ISEStdOut( ISEOutStr.ReadLine() );
      }  
      
      WScript.Sleep( 100 );
    }

    ISEExitCode = ISEProcess.ExitCode;
  }

  ISELogFileStr.Close();

  // END/ERROR file creation
  if ( ISEExitCode != 0 ) {    
    ISETouchFile( ISEStep, "error" );
    
  } else {
    ISETouchFile( ISEStep, "end" );
  }

  return ISEExitCode;
}


//
// UTILITIES
//
function ISEStdOut( ISELine ) {

  ISELogFileStr.WriteLine( ISELine );
  
  if ( ISELogEcho ) {
    WScript.StdOut.WriteLine( ISELine );
  }
}

function ISEStdErr( ISELine ) {
  
  ISELogFileStr.WriteLine( ISELine );

  if ( ISELogEcho ) {
    WScript.StdErr.WriteLine( ISELine );
  }
}

function ISETouchFile( ISERoot, ISEStatus ) {

  var ISETFile = 
    ISEOpenFile( "." + ISERoot + "." + ISEStatus + ".rst" );
  ISETFile.Close();
}

function ISEOpenFile( ISEFilename ) {

  // This function has been updated to deal with a problem seen in CR #870871.
  // In that case the user runs a script that runs impl_1, and then turns around
  // and runs impl_1 -to_step write_bitstream. That second run takes place in
  // the same directory, which means we may hit some of the same files, and in
  // particular, we will open the runme.log file. Even though this script closes
  // the file (now), we see cases where a subsequent attempt to open the file
  // fails. Perhaps the OS is slow to release the lock, or the disk comes into
  // play? In any case, we try to work around this by first waiting if the file
  // is already there for an arbitrary 5 seconds. Then we use a try-catch block
  // and try to open the file 10 times with a one second delay after each attempt.
  // Again, 10 is arbitrary. But these seem to stop the hang in CR #870871.
  // If there is an unrecognized exception when trying to open the file, we output
  // an error message and write details to an exception.log file.
  var ISEFullPath = ISERunDir + "/" + ISEFilename;
  if (ISEFileSys.FileExists(ISEFullPath)) {
    // File is already there. This could be a problem. Wait in case it is still in use.
    WScript.Sleep(5000);
  }
  var i;
  for (i = 0; i < 10; ++i) {
    try {
      return ISEFileSys.OpenTextFile(ISEFullPath, 8, true);
    } catch (exception) {
      var error_code = exception.number & 0xFFFF; // The other bits are a facility code.
      if (error_code == 52) { // 52 is bad file name or number.
        // Wait a second and try again.
        WScript.Sleep(1000);
        continue;
      } else {
        WScript.StdErr.WriteLine("ERROR: Exception caught trying to open file " + ISEFullPath);
        var exceptionFilePath = ISERunDir + "/exception.log";
        if (!ISEFileSys.FileExists(exceptionFilePath)) {
          WScript.StdErr.WriteLine("See file " + exceptionFilePath + " for details.");
          var exceptionFile = ISEFileSys.OpenTextFile(exceptionFilePath, 8, true);
          exceptionFile.WriteLine("ERROR: Exception caught trying to open file " + ISEFullPath);
          exceptionFile.WriteLine("\tException name: " + exception.name);
          exceptionFile.WriteLine("\tException error code: " + error_code);
          exceptionFile.WriteLine("\tException message: " + exception.message);
          exceptionFile.Close();
        }
        throw exception;
      }
    }
  }
  // If we reached this point, we failed to open the file after 10 attempts.
  // We need to error out.
  WScript.StdErr.WriteLine("ERROR: Failed to open file " + ISEFullPath);
  WScript.Quit(1);
}