diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..8834878 --- /dev/null +++ b/Makefile @@ -0,0 +1,37 @@ +# +# Makefile pour le projet filtrage réseau +# + +# +# Constantes pour la compilation des programmes +# + +export CC = gcc +export LD = gcc +export CLIB = ar cq +export CFLAGS = -Wall +export CDEBUG = -g -DDEBUG + +# +# Constantes liees au projet +# + +DIRS=Network Threads + +# +# La cible generale +# + +all: $(patsubst %, _dir_%, $(DIRS)) + +$(patsubst %,_dir_%,$(DIRS)): + cd $(patsubst _dir_%,%,$@) && make + +# +# La cible de nettoyage +# + +clean: $(patsubst %, _clean_%, $(DIRS)) + +$(patsubst %,_clean_%,$(DIRS)): + cd $(patsubst _clean_%,%,$@) && make clean diff --git a/Network/Makefile b/Network/Makefile new file mode 100644 index 0000000..c019eda --- /dev/null +++ b/Network/Makefile @@ -0,0 +1,22 @@ +# +# Makefile pour generer la bibliotheque de fonctions de communication +# + +all: libnet.a + +# +# La cible de nettoyage +# + +clean: + rm -f core *.o libnet.a + +# +# Les cibles pour la bibliotheque +# + +libnet.o: libnet.c libnet.h + +libcom.a: libnet.o + rm -f $@ + $(CLIB) $@ $+ diff --git a/Tangible/Makefile b/Tangible/Makefile new file mode 100644 index 0000000..88735be --- /dev/null +++ b/Tangible/Makefile @@ -0,0 +1,34 @@ +MCU = atmega328p +FCPU = 16000000 + +CC = avr-gcc +LD = avr-gcc +FLAGS = -mmcu=$(MCU) +CFLAGS = -Wall $(FLAGS) -DF_CPU=$(FCPU) -Os +LDFLAGS = $(FLAGS) + +DUDE = avrdude +PROTOCOL = stk500v1 # stk500 / stk500v1 +SPEED = 115200 # 57600 / 115200 +SERIAL = /dev/ttyACM0 # ttyUSB0 / ttyACM0 + +TARGET = broadcast +SOURCES = $(wildcard *.c) +OBJECTS = $(SOURCES:.c=.o) + +all: $(TARGET).hex + +clean: + rm -f *.o $(TARGET).hex $(TARGET) + +$(TARGET): $(OBJECTS) + +$(TARGET).hex: $(TARGET) + avr-objcopy -j .text -j .data -O ihex $(TARGET) $(TARGET).hex + +upload: $(TARGET).hex + stty -F $(SERIAL) hupcl + $(DUDE) -F -v -p $(MCU) -c $(PROTOCOL) -b $(SPEED) -P $(SERIAL) -U flash:w:$(TARGET).hex + +size: $(TARGET) + avr-size --format=avr --mcu=$(MCU) $(TARGET) diff --git a/Tangible/ethernet.c b/Tangible/ethernet.c new file mode 100644 index 0000000..6805973 --- /dev/null +++ b/Tangible/ethernet.c @@ -0,0 +1,15 @@ +#include + +#include "ethernet.h" +#include "w5100.h" + +/** Function for Ethernet hardware **/ + +void ethernet_init(uint8_t *mac,uint8_t *ip,uint8_t *gateway,uint8_t *mask){ +iinchip_init(); +sysinit(0x55,0x55); +setSHAR(mac); +setSIPR(ip); +setGAR(gateway); +setSUBR(mask); +} diff --git a/Tangible/ethernet.h b/Tangible/ethernet.h new file mode 100755 index 0000000..f84a152 --- /dev/null +++ b/Tangible/ethernet.h @@ -0,0 +1,167 @@ +/* +* +@file ethernet.h +* +*/ + +#ifndef _ETHERNET_H_ +#define _ETHERNET_H_ + + +/*************************************************** + * attribute for mcu ( types, ... ) + ***************************************************/ +//#include "mcu_define.h" +#define __MCU_AVR__ 1 +#define __MCU_TYPE__ __MCU_AVR__ + +//---- Refer "Rom File Maker Manual Vx.x.pdf" +#include + +#define _ENDIAN_LITTLE_ 0 /**< This must be defined if system is little-endian alignment */ +#define _ENDIAN_BIG_ 1 +#define SYSTEM_ENDIAN _ENDIAN_LITTLE_ + +#define MAX_SOCK_NUM 4 /**< Maxmium number of socket */ +#define CLK_CPU F_CPU /**< 8Mhz(for serial) */ + +/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/ +#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */ +//#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */ +//#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */ + /* If it is defined, the source files(md5.h,md5.c) must be included in your project. + Otherwize, the source files must be removed in your project. */ + +#define __DEF_IINCHIP_DIRECT_MODE__ 1 +#define __DEF_IINCHIP_INDIRECT_MODE__ 2 +#define __DEF_IINCHIP_SPI_MODE__ 3 + +//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__ +//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__ +#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/ + + +/** +@brief __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip +*/ +#define __DEF_IINCHIP_MAP_BASE__ 0x8000 +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) + #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__ +#else + #define COMMON_BASE 0x0000 +#endif +#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */ +#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */ + + +#if (__MCU_TYPE__ == __MCU_AVR__) + #ifdef __DEF_IINCHIP_INT__ + // iinchip use external interrupt 4 + #define IINCHIP_ISR_DISABLE() (EIMSK &= ~(0x10)) + #define IINCHIP_ISR_ENABLE() (EIMSK |= 0x10) + #define IINCHIP_ISR_GET(X) (X = EIMSK) + #define IINCHIP_ISR_SET(X) (EIMSK = X) + #else + #define IINCHIP_ISR_DISABLE() + #define IINCHIP_ISR_ENABLE() + #define IINCHIP_ISR_GET(X) + #define IINCHIP_ISR_SET(X) + #endif +#else +#error "unknown MCU type" +#endif + +#ifndef NULL +#define NULL ((void *) 0) +#endif + +//typedef enum { false, true } bool; + +#ifndef _SIZE_T +#define _SIZE_T +typedef unsigned int size_t; +#endif + +/** + * The 8-bit signed data type. + */ +typedef char int8; +/** + * The volatile 8-bit signed data type. + */ +typedef volatile char vint8; +/** + * The 8-bit unsigned data type. + */ +typedef unsigned char uint8; +/** + * The volatile 8-bit unsigned data type. + */ +typedef volatile unsigned char vuint8; + +/** + * The 16-bit signed data type. + */ +typedef int int16; +/** + * The volatile 16-bit signed data type. + */ +typedef volatile int vint16; +/** + * The 16-bit unsigned data type. + */ +typedef unsigned int uint16; +/** + * The volatile 16-bit unsigned data type. + */ +typedef volatile unsigned int vuint16; +/** + * The 32-bit signed data type. + */ +typedef long int32; +/** + * The volatile 32-bit signed data type. + */ +typedef volatile long vint32; +/** + * The 32-bit unsigned data type. + */ +typedef unsigned long uint32; +/** + * The volatile 32-bit unsigned data type. + */ +typedef volatile unsigned long vuint32; + +/* bsd */ +typedef uint8 u_char; /**< 8-bit value */ +typedef uint8 SOCKET; +typedef uint16 u_short; /**< 16-bit value */ +typedef uint16 u_int; /**< 16-bit value */ +typedef uint32 u_long; /**< 32-bit value */ + +typedef union _un_l2cval { + u_long lVal; + u_char cVal[4]; +}un_l2cval; + +typedef union _un_i2cval { + u_int iVal; + u_char cVal[2]; +}un_i2cval; + + +/** global define */ +#define FW_VERSION 0x01010000 /* System F/W Version : 1.1.0.0 */ +#define HW_VERSION 0x01000000 + + +#define TX_RX_MAX_BUF_SIZE 2048 +#define TX_BUF 0x1100 +#define RX_BUF (TX_BUF+TX_RX_MAX_BUF_SIZE) + +#define UART_DEVICE_CNT 1 /**< UART device number */ +/* #define SUPPORT_UART_ONE */ + +void ethernet_init(uint8_t *mac,uint8_t *ip,uint8_t *gateway,uint8_t *mask); + +#endif /* _ETHERNET_H_ */ diff --git a/Tangible/iic.c b/Tangible/iic.c new file mode 100644 index 0000000..8971802 --- /dev/null +++ b/Tangible/iic.c @@ -0,0 +1,83 @@ +/************************ +* i2c minimal library * +************************/ + +#include +#include + +#include "iic.h" + +// Initialize i2c +void TWI_init(void) +{ + //set SCL to 400kHz + TWSR = 0x00; + TWBR = 0x0C; + //enable TWI + TWCR = (1< +#include + +#include "serial.h" + +static int send_serial_printf(char c,FILE *stream); +static FILE mystdout=FDEV_SETUP_STREAM(send_serial_printf,NULL,_FDEV_SETUP_WRITE); + +void init_serial(int speed){ +/* Set baud rate */ +UBRR0 = F_CPU/(((unsigned long int)speed)<<4)-1; + +/* Enable transmitter & receiver */ +UCSR0B = (1< +#endif + +static uint16 local_port; + +/** +@brief This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it. +@return 1 for success else 0. +*/ +uint8 socket( + SOCKET s, /**< for socket number */ + uint8 protocol, /**< for socket protocol */ + uint16 port, /**< the source port for the socket */ + uint8 flag /**< the option for the socket */ + ) +{ + uint8 ret; +#ifdef __DEF_IINCHIP_DBG__ + printf("socket()\r\n"); +#endif + if ((protocol == Sn_MR_TCP) || (protocol == Sn_MR_UDP) || (protocol == Sn_MR_IPRAW) || (protocol == Sn_MR_MACRAW) || (protocol == Sn_MR_PPPOE)) + { + close(s); + IINCHIP_WRITE(Sn_MR(s),protocol | flag); + if (port != 0) { + IINCHIP_WRITE(Sn_PORT0(s),(uint8)((port & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(port & 0x00ff)); + } else { + local_port++; // if don't set the source port, set local_port number. + IINCHIP_WRITE(Sn_PORT0(s),(uint8)((local_port & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_PORT0(s) + 1),(uint8)(local_port & 0x00ff)); + } + IINCHIP_WRITE(Sn_CR(s),Sn_CR_OPEN); // run sockinit Sn_CR + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + ret = 1; + } + else + { + ret = 0; + } +#ifdef __DEF_IINCHIP_DBG__ + printf("Sn_SR = %.2x , Protocol = %.2x\r\n", IINCHIP_READ(Sn_SR(s)), IINCHIP_READ(Sn_MR(s))); +#endif + return ret; +} + + +/** +@brief This function close the socket and parameter is "s" which represent the socket number +*/ +void close(SOCKET s) +{ +#ifdef __DEF_IINCHIP_DBG__ + printf("close()\r\n"); +#endif + + IINCHIP_WRITE(Sn_CR(s),Sn_CR_CLOSE); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + + /* +2008.01 [hwkim]: clear interrupt */ + #ifdef __DEF_IINCHIP_INT__ + /* m2008.01 [bj] : all clear */ + putISR(s, 0x00); + #else + /* m2008.01 [bj] : all clear */ + IINCHIP_WRITE(Sn_IR(s), 0xFF); + #endif +} + + +/** +@brief This function established the connection for the channel in passive (server) mode. This function waits for the request from the peer. +@return 1 for success else 0. +*/ +uint8 listen( + SOCKET s /**< the socket number */ + ) +{ + uint8 ret; +#ifdef __DEF_IINCHIP_DBG__ + printf("listen()\r\n"); +#endif + if (IINCHIP_READ(Sn_SR(s)) == SOCK_INIT) + { + IINCHIP_WRITE(Sn_CR(s),Sn_CR_LISTEN); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + ret = 1; + } + else + { + ret = 0; +#ifdef __DEF_IINCHIP_DBG__ + printf("Fail[invalid ip,port]\r\n"); +#endif + } + return ret; +} + + +/** +@brief This function established the connection for the channel in Active (client) mode. + This function waits for the until the connection is established. + +@return 1 for success else 0. +*/ +uint8 connect(SOCKET s, uint8 * addr, uint16 port) +{ + uint8 ret; +#ifdef __DEF_IINCHIP_DBG__ + printf("connect()\r\n"); +#endif + if + ( + ((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) || + ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || + (port == 0x00) + ) + { + ret = 0; +#ifdef __DEF_IINCHIP_DBG__ + printf("Fail[invalid ip,port]\r\n"); +#endif + } + else + { + ret = 1; + // set destination IP + IINCHIP_WRITE(Sn_DIPR0(s),addr[0]); + IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); + IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); + IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); + IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff)); + IINCHIP_WRITE(Sn_CR(s),Sn_CR_CONNECT); + /* m2008.01 [bj] : wait for completion */ + while ( IINCHIP_READ(Sn_CR(s)) ) ; + + } + + return ret; +} + + + +/** +@brief This function used for disconnect the socket and parameter is "s" which represent the socket number +@return 1 for success else 0. +*/ +void disconnect(SOCKET s) +{ +#ifdef __DEF_IINCHIP_DBG__ + printf("disconnect()\r\n"); +#endif + IINCHIP_WRITE(Sn_CR(s),Sn_CR_DISCON); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ +} + + +/** +@brief This function used to send the data in TCP mode +@return 1 for success else 0. +*/ +uint16 send( + SOCKET s, /**< the socket index */ + const uint8 * buf, /**< a pointer to data */ + uint16 len /**< the data size to be send */ + ) +{ + uint8 status=0; + uint16 ret=0; + uint16 freesize=0; +#ifdef __DEF_IINCHIP_DBG__ + printf("send()\r\n"); +#endif + + if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. + else ret = len; + + // if freebuf is available, start. + do + { + freesize = getSn_TX_FSR(s); + status = IINCHIP_READ(Sn_SR(s)); + if ((status != SOCK_ESTABLISHED) && (status != SOCK_CLOSE_WAIT)) + { + ret = 0; + break; + } +#ifdef __DEF_IINCHIP_DBG__ + printf("socket %d freesize(%d) empty or error\r\n", s, freesize); +#endif + } while (freesize < ret); + + // copy data + send_data_processing(s, (uint8 *)buf, ret); + IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#else + while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#endif + { + /* m2008.01 [bj] : reduce code */ + if ( IINCHIP_READ(Sn_SR(s)) == SOCK_CLOSED ) + { +#ifdef __DEF_IINCHIP_DBG__ + printf("SOCK_CLOSED.\r\n"); +#endif + close(s); + return 0; + } + } +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); +#else + IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); +#endif + return ret; +} + + +/** +@brief This function is an application I/F function which is used to receive the data in TCP mode. + It continues to wait for data as much as the application wants to receive. + +@return received data size for success else -1. +*/ +uint16 recv( + SOCKET s, /**< socket index */ + uint8 * buf, /**< a pointer to copy the data to be received */ + uint16 len /**< the data size to be read */ + ) +{ + uint16 ret=0; +#ifdef __DEF_IINCHIP_DBG__ + printf("recv()\r\n"); +#endif + + + if ( len > 0 ) + { + recv_data_processing(s, buf, len); + IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + ret = len; + } + return ret; +} + + +/** +@brief This function is an application I/F function which is used to send the data for other then TCP mode. + Unlike TCP transmission, The peer's destination address and the port is needed. + +@return This function return send data size for success else -1. +*/ +uint16 sendto( + SOCKET s, /**< socket index */ + const uint8 * buf, /**< a pointer to the data */ + uint16 len, /**< the data size to send */ + uint8 * addr, /**< the peer's Destination IP address */ + uint16 port /**< the peer's destination port number */ + ) +{ +// uint8 status=0; +// uint8 isr=0; + uint16 ret=0; + +#ifdef __DEF_IINCHIP_DBG__ + printf("sendto()\r\n"); +#endif + if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. + else ret = len; + + if + ( + ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || + ((port == 0x00)) ||(ret == 0) + ) + { + /* +2008.01 [bj] : added return value */ + ret = 0; +#ifdef __DEF_IINCHIP_DBG__ + printf("%d Fail[%.2x.%.2x.%.2x.%.2x, %.d, %d]\r\n",s, addr[0], addr[1], addr[2], addr[3] , port, len); + printf("Fail[invalid ip,port]\r\n"); +#endif + } + else + { + IINCHIP_WRITE(Sn_DIPR0(s),addr[0]); + IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); + IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); + IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); + IINCHIP_WRITE(Sn_DPORT0(s),(uint8)((port & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_DPORT0(s) + 1),(uint8)(port & 0x00ff)); + + // copy data + send_data_processing(s, (uint8 *)buf, ret); + IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#else + while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#endif + { +#ifdef __DEF_IINCHIP_INT__ + if (getISR(s) & Sn_IR_TIMEOUT) +#else + if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT) +#endif + { +#ifdef __DEF_IINCHIP_DBG__ + printf("send fail.\r\n"); +#endif +/* +2008.01 [bj]: clear interrupt */ +#ifdef __DEF_IINCHIP_INT__ + putISR(s, getISR(s) & ~(Sn_IR_SEND_OK | Sn_IR_TIMEOUT)); /* clear SEND_OK & TIMEOUT */ +#else + IINCHIP_WRITE(Sn_IR(s), (Sn_IR_SEND_OK | Sn_IR_TIMEOUT)); /* clear SEND_OK & TIMEOUT */ +#endif + return 0; + } + } + +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); +#else + IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); +#endif + + } + return ret; +} + + +/** +@brief This function is an application I/F function which is used to receive the data in other then + TCP mode. This function is used to receive UDP, IP_RAW and MAC_RAW mode, and handle the header as well. + +@return This function return received data size for success else -1. +*/ +uint16 recvfrom( + SOCKET s, /**< the socket number */ + uint8 * buf, /**< a pointer to copy the data to be received */ + uint16 len, /**< the data size to read */ + uint8 * addr, /**< a pointer to store the peer's IP address */ + uint16 *port /**< a pointer to store the peer's port number. */ + ) +{ + uint8 head[8]; + uint16 data_len=0; + uint16 ptr=0; +#ifdef __DEF_IINCHIP_DBG__ + printf("recvfrom()\r\n"); +#endif + + if ( len > 0 ) + { + ptr = IINCHIP_READ(Sn_RX_RD0(s)); + ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_RX_RD0(s) + 1); +#ifdef __DEF_IINCHIP_DBG__ + printf("ISR_RX: rd_ptr : %.4x\r\n", ptr); +#endif + switch (IINCHIP_READ(Sn_MR(s)) & 0x07) + { + case Sn_MR_UDP : + read_data(s, (uint8 *)ptr, head, 0x08); + ptr += 8; + // read peer's IP address, port number. + addr[0] = head[0]; + addr[1] = head[1]; + addr[2] = head[2]; + addr[3] = head[3]; + *port = head[4]; + *port = (*port << 8) + head[5]; + data_len = head[6]; + data_len = (data_len << 8) + head[7]; + +#ifdef __DEF_IINCHIP_DBG__ + printf("UDP msg arrived\r\n"); + printf("source Port : %d\r\n", *port); + printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]); +#endif + + read_data(s, (uint8 *)ptr, buf, data_len); // data copy. + ptr += data_len; + + IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); + break; + + case Sn_MR_IPRAW : + read_data(s, (uint8 *)ptr, head, 0x06); + ptr += 6; + + addr[0] = head[0]; + addr[1] = head[1]; + addr[2] = head[2]; + addr[3] = head[3]; + data_len = head[4]; + data_len = (data_len << 8) + head[5]; + +#ifdef __DEF_IINCHIP_DBG__ + printf("IP RAW msg arrived\r\n"); + printf("source IP : %d.%d.%d.%d\r\n", addr[0], addr[1], addr[2], addr[3]); +#endif + read_data(s, (uint8 *)ptr, buf, data_len); // data copy. + ptr += data_len; + + IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); + break; + case Sn_MR_MACRAW : + read_data(s,(uint8*)ptr,head,2); + ptr+=2; + data_len = head[0]; + data_len = (data_len<<8) + head[1] - 2; + + read_data(s,(uint8*) ptr,buf,data_len); + ptr += data_len; + IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); + +#ifdef __DEF_IINCHIP_DGB__ + printf("MAC RAW msg arrived\r\n"); + printf("dest mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[0],buf[1],buf[2],buf[3],buf[4],buf[5]); + printf("src mac=%.2X.%.2X.%.2X.%.2X.%.2X.%.2X\r\n",buf[6],buf[7],buf[8],buf[9],buf[10],buf[11]); + printf("type =%.2X%.2X\r\n",buf[12],buf[13]); +#endif + break; + + default : + break; + } + IINCHIP_WRITE(Sn_CR(s),Sn_CR_RECV); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; + /* ------- */ + } +#ifdef __DEF_IINCHIP_DBG__ + printf("recvfrom() end ..\r\n"); +#endif + return data_len; +} + + +uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len) +{ +// uint8 status=0; +// uint8 isr=0; + uint16 ret=0; + +#ifdef __DEF_IINCHIP_DBG__ + printf("igmpsend()\r\n"); +#endif + if (len > getIINCHIP_TxMAX(s)) ret = getIINCHIP_TxMAX(s); // check size not to exceed MAX size. + else ret = len; + + if (ret == 0) + { + ; +#ifdef __DEF_IINCHIP_DBG__ + printf("%d Fail[%d]\r\n",len,ret); +#endif + } + else + { + // copy data + send_data_processing(s, (uint8 *)buf, ret); + IINCHIP_WRITE(Sn_CR(s),Sn_CR_SEND); +/* +2008.01 bj */ + while( IINCHIP_READ(Sn_CR(s)) ) + ; +/* ------- */ + +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + while ( (getISR(s) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#else + while ( (IINCHIP_READ(Sn_IR(s)) & Sn_IR_SEND_OK) != Sn_IR_SEND_OK ) +#endif + { + IINCHIP_READ(Sn_SR(s)); +#ifdef __DEF_IINCHIP_INT__ + if (getISR(s) & Sn_IR_TIMEOUT) +#else + if (IINCHIP_READ(Sn_IR(s)) & Sn_IR_TIMEOUT) +#endif + { +#ifdef __DEF_IINCHIP_DBG__ + printf("igmpsend fail.\r\n"); +#endif + /* in case of igmp, if send fails, then socket closed */ + /* if you want change, remove this code. */ + close(s); + /* ----- */ + + return 0; + } + } + +/* +2008.01 bj */ +#ifdef __DEF_IINCHIP_INT__ + putISR(s, getISR(s) & (~Sn_IR_SEND_OK)); +#else + IINCHIP_WRITE(Sn_IR(s), Sn_IR_SEND_OK); +#endif + } + return ret; +} + diff --git a/Tangible/socket.h b/Tangible/socket.h new file mode 100755 index 0000000..11e6bf7 --- /dev/null +++ b/Tangible/socket.h @@ -0,0 +1,23 @@ +/* +* +@file socket.h +@brief define function of socket API +* +*/ + +#ifndef _SOCKET_H_ +#define _SOCKET_H_ + +extern uint8 socket(SOCKET s, uint8 protocol, uint16 port, uint8 flag); // Opens a socket(TCP or UDP or IP_RAW mode) +extern void close(SOCKET s); // Close socket +extern uint8 connect(SOCKET s, uint8 * addr, uint16 port); // Establish TCP connection (Active connection) +extern void disconnect(SOCKET s); // disconnect the connection +extern uint8 listen(SOCKET s); // Establish TCP connection (Passive connection) +extern uint16 send(SOCKET s, const uint8 * buf, uint16 len); // Send data (TCP) +extern uint16 recv(SOCKET s, uint8 * buf, uint16 len); // Receive data (TCP) +extern uint16 sendto(SOCKET s, const uint8 * buf, uint16 len, uint8 * addr, uint16 port); // Send data (UDP/IP RAW) +extern uint16 recvfrom(SOCKET s, uint8 * buf, uint16 len, uint8 * addr, uint16 *port); // Receive data (UDP/IP RAW) + +extern uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len); +#endif +/* _SOCKET_H_ */ diff --git a/Tangible/spi.h b/Tangible/spi.h new file mode 100755 index 0000000..6b41688 --- /dev/null +++ b/Tangible/spi.h @@ -0,0 +1,58 @@ +//----------------------------------------------------------------------------- +//AVR Mega168 SPI HAL +#define BIT0 0x01 +#define BIT1 0x02 +#define BIT2 0x04 +#define BIT3 0x08 +#define BIT4 0x10 +#define BIT5 0x20 +#define BIT6 0x40 +#define BIT7 0x80 + +#define SPI0_SS_BIT BIT2 +#define SPI0_SS_DDR DDRB +#define SPI0_SS_PORT PORTB + +#define SPI0_SCLK_BIT BIT5 +#define SPI0_SCLK_DDR DDRB +#define SPI0_SCLK_PORT PORTB + +#define SPI0_MOSI_BIT BIT3 +#define SPI0_MOSI_DDR DDRB +#define SPI0_MOSI_PORT PORTB + +#define SPI0_MISO_BIT BIT4 +#define SPI0_MISO_DDR DDRB +#define SPI0_MISO_PORT PORTB + + +#define SPI0_WaitForReceive() +#define SPI0_RxData() (SPDR) + +#define SPI0_TxData(Data) (SPDR = Data) +#define SPI0_WaitForSend() while( (SPSR & 0x80)==0x00 ) + +#define SPI0_SendByte(Data) SPI0_TxData(Data);SPI0_WaitForSend() +#define SPI0_RecvBute() SPI0_RxData() + +// PB4(MISO), PB3(MOSI), PB5(SCK), PB2(/SS) // CS=1, waiting for SPI start // SPI mode 0, 4MHz +#define SPI0_Init() DDRB |= SPI0_SS_BIT|SPI0_SCLK_BIT|SPI0_MOSI_BIT;\ + PORTB |= SPI0_SS_BIT; PORTB &= ~(SPI0_SCLK_BIT|SPI0_MOSI_BIT);\ + SPCR = 0x50 +//----------------------------------------------------------------------------- + +//----------------------------------------------------------------------------- +//IInChip SPI HAL +#define IINCHIP_SpiInit SPI0_Init +#define IINCHIP_SpiSendData SPI0_SendByte +#define IINCHIP_SpiRecvData SPI0_RxData + + +#define IINCHIP_CS_BIT BIT2 +#define IINCHIP_CS_DDR DDRB +#define IINCHIP_CS_PORT PORTB + +#define IINCHIP_CSInit() (IINCHIP_CS_DDR |= IINCHIP_CS_BIT) +#define IINCHIP_CSon() (IINCHIP_CS_PORT |= IINCHIP_CS_BIT) +#define IINCHIP_CSoff() (IINCHIP_CS_PORT &= ~IINCHIP_CS_BIT) +//----------------------------------------------------------------------------- diff --git a/Tangible/tangibleInterface.c b/Tangible/tangibleInterface.c new file mode 100644 index 0000000..2673430 --- /dev/null +++ b/Tangible/tangibleInterface.c @@ -0,0 +1,18 @@ +#include +#include +#include + +#include "serial.h" +#include "ethernet.h" +#include "w5100.h" +#include "socket.h" + +#define MAC_SIZE 6 +#define IPV4_SIZE 4 + +int main(void) +{ +init_printf(); +// Your code here !! +return 0; +} diff --git a/Tangible/w5100.c b/Tangible/w5100.c new file mode 100755 index 0000000..4972f94 --- /dev/null +++ b/Tangible/w5100.c @@ -0,0 +1,1300 @@ +/* + * (c)COPYRIGHT + * ALL RIGHT RESERVED + * + * FileName : w5100.c + * Revision History : + * ---------- ------- ------------------------------------------------ + * Date version Description + * ---------- ------- ------------------------------------------------ + * 01/25/2007 1.1 Bug is Fixed in the Indirect Mode + * : Memory mapping error + * ---------- ------- ------------------------------------------------ + * 01/08/2008 1.2 Modification of Socket Command Part + * : Check if the appropriately performed after writing Sn_CR + * + * Modification of SPI Part + * : SPI code changed by adding 'spi.h'. + * : Change control type for SPI port from byte to bit. + * ---------- ------- ------------------------------------------------ + * 01/15/2008 1.3 Bug is Fixed in the pppinit() fuction. + * : do not clear interrupt value, so fixed. + * + * Modification of ISR + * : Do not exit ISR, if there is interrupt. + * ---------- ------- ------------------------------------------------ + * 03/21/2008 1.4 Modification of SetMR() function + * : Use IINCHIP_WRITE() function in Direct or SPI mode. + * ---------- ------- ------------------------------------------------ + */ +#include +#include + +#include +// #include + +#include "ethernet.h" +#include "socket.h" +#include "w5100.h" + +#ifdef __DEF_IINCHIP_PPP__ + #include "md5.h" +#endif + + +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) +#include "spi.h" //+2007113[jhpark] +#endif + +static uint8 I_STATUS[MAX_SOCK_NUM]; +static uint16 SMASK[MAX_SOCK_NUM]; /**< Variable for Tx buffer MASK in each channel */ +static uint16 RMASK[MAX_SOCK_NUM]; /**< Variable for Rx buffer MASK in each channel */ +static uint16 SSIZE[MAX_SOCK_NUM]; /**< Max Tx buffer size by each channel */ +static uint16 RSIZE[MAX_SOCK_NUM]; /**< Max Rx buffer size by each channel */ +static uint16 SBUFBASEADDRESS[MAX_SOCK_NUM]; /**< Tx buffer base address by each channel */ +static uint16 RBUFBASEADDRESS[MAX_SOCK_NUM]; /**< Rx buffer base address by each channel */ + +uint8 getISR(uint8 s) +{ + return I_STATUS[s]; +} + +void putISR(uint8 s, uint8 val) +{ + I_STATUS[s] = val; +} + +uint16 getIINCHIP_RxMAX(uint8 s) +{ + return RSIZE[s]; +} +uint16 getIINCHIP_TxMAX(uint8 s) +{ + return SSIZE[s]; +} +uint16 getIINCHIP_RxMASK(uint8 s) +{ + return RMASK[s]; +} +uint16 getIINCHIP_TxMASK(uint8 s) +{ + return SMASK[s]; +} +uint16 getIINCHIP_RxBASE(uint8 s) +{ + return RBUFBASEADDRESS[s]; +} +uint16 getIINCHIP_TxBASE(uint8 s) +{ + return SBUFBASEADDRESS[s]; +} + + /** +@brief This function writes the data into W5100 registers. +*/ +uint8 IINCHIP_WRITE(uint16 addr,uint8 data) +{ +// DIRECT MODE I/F +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) + IINCHIP_ISR_DISABLE(); + *((vuint8*)(addr)) = data; + IINCHIP_ISR_ENABLE(); +#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) /* INDIRECT MODE I/F */ + IINCHIP_ISR_DISABLE(); + *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); + *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); + *((vuint8*)IDM_DR) = data; + IINCHIP_ISR_ENABLE(); +#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) + IINCHIP_ISR_DISABLE(); + IINCHIP_SpiInit(); + + //SPI MODE I/F + IINCHIP_CSoff(); // CS=0, SPI start + + IINCHIP_SpiSendData(0xF0); + IINCHIP_SpiSendData((addr & 0xFF00) >> 8); + IINCHIP_SpiSendData(addr & 0x00FF); + IINCHIP_SpiSendData(data); + + IINCHIP_CSon(); + + IINCHIP_ISR_ENABLE(); +#else + #error "unknown bus type" +#endif + return 1; +} + + +/** +@brief This function reads the value from W5100 registers. +*/ +uint8 IINCHIP_READ(uint16 addr) +{ + uint8 data; + +// DIRECT MODE I/F + +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) + IINCHIP_ISR_DISABLE(); + data = *((vuint8*)(addr)); + IINCHIP_ISR_ENABLE(); +#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) + IINCHIP_ISR_DISABLE(); + *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); + *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); + data = *((vuint8*)IDM_DR); + IINCHIP_ISR_ENABLE(); + +#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) + IINCHIP_ISR_DISABLE(); + IINCHIP_SpiInit(); + IINCHIP_CSoff(); // CS=0, SPI start + + IINCHIP_SpiSendData(0x0F); + IINCHIP_SpiSendData((addr & 0xFF00) >> 8); + IINCHIP_SpiSendData(addr & 0x00FF); + + + IINCHIP_SpiSendData(0); + data = IINCHIP_SpiRecvData(); + + IINCHIP_CSon(); // SPI end + IINCHIP_ISR_ENABLE(); +#else + #error "unknown bus type" +#endif + return data; +} + + +/** +@brief This function writes into W5100 memory(Buffer) +*/ +uint16 wiz_write_buf(uint16 addr,uint8* buf,uint16 len) +{ +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) + IINCHIP_ISR_DISABLE(); + memcpy((uint8 *)addr, buf, len); + IINCHIP_ISR_ENABLE(); +#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) + uint16 idx = 0; + IINCHIP_ISR_DISABLE(); + *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); + *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); + for (idx = 0; idx < len ; idx++) *((vuint8*)IDM_DR) = buf[idx]; + IINCHIP_ISR_ENABLE(); +#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) + uint16 idx = 0; + + IINCHIP_ISR_DISABLE(); + IINCHIP_SpiInit(); + + //SPI MODE I/F + for(idx=0;idx> 8); + IINCHIP_SpiSendData((addr+idx) & 0x00FF); + IINCHIP_SpiSendData(buf[idx]); + + IINCHIP_CSon(); // CS=0, SPI end + } + + IINCHIP_ISR_ENABLE(); +#else + #error "unknown bus type" +#endif + return len; +} + + +/** +@brief This function reads into W5100 memory(Buffer) +*/ +uint16 wiz_read_buf(uint16 addr, uint8* buf,uint16 len) +{ +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__) + IINCHIP_ISR_DISABLE(); + memcpy(buf, (uint8 *)addr, len); + IINCHIP_ISR_ENABLE(); +#elif(__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) + uint16 idx = 0; + IINCHIP_ISR_DISABLE(); + *((vuint8*)IDM_AR0) = (uint8)((addr & 0xFF00) >> 8); + *((vuint8*)IDM_AR1) = (uint8)(addr & 0x00FF); + for (idx = 0; idx < len ; idx++) buf[idx] = *((vuint8*)IDM_DR); + IINCHIP_ISR_ENABLE(); +#elif (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_SPI_MODE__) + uint16 idx = 0; + IINCHIP_ISR_DISABLE(); + + IINCHIP_SpiInit(); + + for (idx=0; idx> 8); + IINCHIP_SpiSendData((addr+idx) & 0x00FF); + + + IINCHIP_SpiSendData(0); + buf[idx] = IINCHIP_SpiRecvData(); + + IINCHIP_CSon(); // CS=0, SPI end + } + + IINCHIP_ISR_ENABLE(); +#else + #error "unknown bus type" +#endif + return len; +} + + +/** +@brief Socket interrupt routine +*/ +#ifdef __DEF_IINCHIP_INT__ +ISR(INT4_vect) +{ + uint8 int_val; + IINCHIP_ISR_DISABLE(); + int_val = IINCHIP_READ(IR); + + /* +200801[bj] process all of interupt */ + do { + /*---*/ + + if (int_val & IR_CONFLICT) + { + printf("IP conflict : %.2x\r\n", int_val); + } + if (int_val & IR_UNREACH) + { + printf("INT Port Unreachable : %.2x\r\n", int_val); + printf("UIPR0 : %d.%d.%d.%d\r\n", IINCHIP_READ(UIPR0), IINCHIP_READ(UIPR0+1), IINCHIP_READ(UIPR0+2), IINCHIP_READ(UIPR0+3)); + printf("UPORT0 : %.2x %.2x\r\n", IINCHIP_READ(UPORT0), IINCHIP_READ(UPORT0+1)); + } + + /* +200801[bj] interrupt clear */ + IINCHIP_WRITE(IR, 0xf0); + /*---*/ + + if (int_val & IR_SOCK(0)) + { + /* +-200801[bj] save interrupt value*/ + I_STATUS[0] |= IINCHIP_READ(Sn_IR(0)); // can be come to over two times. + IINCHIP_WRITE(Sn_IR(0), I_STATUS[0]); + /*---*/ + } + if (int_val & IR_SOCK(1)) + { + /* +-200801[bj] save interrupt value*/ + I_STATUS[1] |= IINCHIP_READ(Sn_IR(1)); + IINCHIP_WRITE(Sn_IR(1), I_STATUS[1]); + /*---*/ + } + if (int_val & IR_SOCK(2)) + { + /* +-200801[bj] save interrupt value*/ + I_STATUS[2] |= IINCHIP_READ(Sn_IR(2)); + IINCHIP_WRITE(Sn_IR(2), I_STATUS[2]); + /*---*/ + } + if (int_val & IR_SOCK(3)) + { + /* +-200801[bj] save interrupt value*/ + I_STATUS[3] |= IINCHIP_READ(Sn_IR(3)); + IINCHIP_WRITE(Sn_IR(3), I_STATUS[3]); + /*---*/ + } + + /* +-200801[bj] re-read interrupt value*/ + int_val = IINCHIP_READ(IR); + + /* +200801[bj] if exist, contiue to process */ + } while (int_val != 0x00); + /*---*/ + + IINCHIP_ISR_ENABLE(); +} +#endif + +/** +@brief This function is for resetting of the iinchip. Initializes the iinchip to work in whether DIRECT or INDIRECT mode +*/ +void iinchip_init(void) +{ + setMR( MR_RST ); +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) + setMR( MR_IND | MR_AI ); +#ifdef __DEF_IINCHIP_DBG__ + printf("MR value is %d \r\n",IINCHIP_READ(MR)); +#endif +#endif +} + + +/** +@brief This function set the transmit & receive buffer size as per the channels is used + +Note for TMSR and RMSR bits are as follows\n +bit 1-0 : memory size of channel #0 \n +bit 3-2 : memory size of channel #1 \n +bit 5-4 : memory size of channel #2 \n +bit 7-6 : memory size of channel #3 \n\n +Maximum memory size for Tx, Rx in the W5100 is 8K Bytes,\n +In the range of 8KBytes, the memory size could be allocated dynamically by each channel.\n +Be attentive to sum of memory size shouldn't exceed 8Kbytes\n +and to data transmission and receiption from non-allocated channel may cause some problems.\n +If the 8KBytes memory is already assigned to centain channel, \n +other 3 channels couldn't be used, for there's no available memory.\n +If two 4KBytes memory are assigned to two each channels, \n +other 2 channels couldn't be used, for there's no available memory.\n +*/ +void sysinit( + uint8 tx_size, /**< tx_size Tx memory size (00 - 1KByte, 01- 2KBtye, 10 - 4KByte, 11 - 8KByte) */ + uint8 rx_size /**< rx_size Rx memory size (00 - 1KByte, 01- 2KBtye, 10 - 4KByte, 11 - 8KByte) */ + ) +{ + int16 i; + int16 ssum,rsum; + +#ifdef __DEF_IINCHIP_DBG__ + printf("sysinit()\r\n"); +#endif + + ssum = 0; + rsum = 0; + + IINCHIP_WRITE(TMSR,tx_size); /* Set Tx memory size for each channel */ + IINCHIP_WRITE(RMSR,rx_size); /* Set Rx memory size for each channel */ + + SBUFBASEADDRESS[0] = (uint16)(__DEF_IINCHIP_MAP_TXBUF__); /* Set base address of Tx memory for channel #0 */ + RBUFBASEADDRESS[0] = (uint16)(__DEF_IINCHIP_MAP_RXBUF__); /* Set base address of Rx memory for channel #0 */ + +#ifdef __DEF_IINCHIP_DBG__ + printf("Channel : SEND MEM SIZE : RECV MEM SIZE\r\n"); +#endif + + for (i = 0 ; i < MAX_SOCK_NUM; i++) // Set the size, masking and base address of Tx & Rx memory by each channel + { + SSIZE[i] = (int16)(0); + RSIZE[i] = (int16)(0); + if (ssum < 8192) + { + switch((tx_size >> i*2) & 0x03) // Set Tx memory size + { + case 0: + SSIZE[i] = (int16)(1024); + SMASK[i] = (uint16)(0x03FF); + break; + case 1: + SSIZE[i] = (int16)(2048); + SMASK[i] = (uint16)(0x07FF); + break; + case 2: + SSIZE[i] = (int16)(4096); + SMASK[i] = (uint16)(0x0FFF); + break; + case 3: + SSIZE[i] = (int16)(8192); + SMASK[i] = (uint16)(0x1FFF); + break; + } + } + if (rsum < 8192) + { + switch((rx_size >> i*2) & 0x03) // Set Rx memory size + { + case 0: + RSIZE[i] = (int16)(1024); + RMASK[i] = (uint16)(0x03FF); + break; + case 1: + RSIZE[i] = (int16)(2048); + RMASK[i] = (uint16)(0x07FF); + break; + case 2: + RSIZE[i] = (int16)(4096); + RMASK[i] = (uint16)(0x0FFF); + break; + case 3: + RSIZE[i] = (int16)(8192); + RMASK[i] = (uint16)(0x1FFF); + break; + } + } + ssum += SSIZE[i]; + rsum += RSIZE[i]; + + if (i != 0) // Sets base address of Tx and Rx memory for channel #1,#2,#3 + { + SBUFBASEADDRESS[i] = SBUFBASEADDRESS[i-1] + SSIZE[i-1]; + RBUFBASEADDRESS[i] = RBUFBASEADDRESS[i-1] + RSIZE[i-1]; + } +#ifdef __DEF_IINCHIP_DBG__ + printf("%d : %.4x : %.4x : %.4x : %.4x\r\n", i, (uint16)SBUFBASEADDRESS[i], (uint16)RBUFBASEADDRESS[i], SSIZE[i], RSIZE[i]); +#endif + } +} + + +void setMR(uint8 val) +{ + +#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_INDIRECT_MODE__) + *((volatile uint8*)(MR)) = val; +#else + /* DIRECT ACCESS */ + IINCHIP_WRITE(MR,val); +#endif +} + + +/** +@brief This function sets up gateway IP address. +*/ +void setGAR( + uint8 * addr /**< a pointer to a 4 -byte array responsible to set the Gateway IP address. */ + ) +{ + IINCHIP_WRITE((GAR0 + 0),addr[0]); + IINCHIP_WRITE((GAR0 + 1),addr[1]); + IINCHIP_WRITE((GAR0 + 2),addr[2]); + IINCHIP_WRITE((GAR0 + 3),addr[3]); +} +void getGWIP(uint8 * addr) +{ + addr[0] = IINCHIP_READ((GAR0 + 0)); + addr[1] = IINCHIP_READ((GAR0 + 1)); + addr[2] = IINCHIP_READ((GAR0 + 2)); + addr[3] = IINCHIP_READ((GAR0 + 3)); +} + + +/** +@brief It sets up SubnetMask address +*/ +void setSUBR( + uint8 * addr /**< a pointer to a 4 -byte array responsible to set the SubnetMask address */ + ) +{ + IINCHIP_WRITE((SUBR0 + 0),addr[0]); + IINCHIP_WRITE((SUBR0 + 1),addr[1]); + IINCHIP_WRITE((SUBR0 + 2),addr[2]); + IINCHIP_WRITE((SUBR0 + 3),addr[3]); +} + + +/** +@brief This function sets up MAC address. +*/ +void setSHAR( + uint8 * addr /**< a pointer to a 6 -byte array responsible to set the MAC address. */ + ) +{ + IINCHIP_WRITE((SHAR0 + 0),addr[0]); + IINCHIP_WRITE((SHAR0 + 1),addr[1]); + IINCHIP_WRITE((SHAR0 + 2),addr[2]); + IINCHIP_WRITE((SHAR0 + 3),addr[3]); + IINCHIP_WRITE((SHAR0 + 4),addr[4]); + IINCHIP_WRITE((SHAR0 + 5),addr[5]); +} + + +/** +@brief This function sets up Source IP address. +*/ +void setSIPR( + uint8 * addr /**< a pointer to a 4 -byte array responsible to set the Source IP address. */ + ) +{ + IINCHIP_WRITE((SIPR0 + 0),addr[0]); + IINCHIP_WRITE((SIPR0 + 1),addr[1]); + IINCHIP_WRITE((SIPR0 + 2),addr[2]); + IINCHIP_WRITE((SIPR0 + 3),addr[3]); +} + + +/** +@brief This function gets Interrupt register in common register. + */ +uint8 getIR( void ) +{ + return IINCHIP_READ(IR); +} + + + +/** +@brief This function sets up Retransmission time. + +If there is no response from the peer or delay in response then retransmission +will be there as per RTR (Retry Time-value Register)setting +*/ +void setRTR(uint16 timeout) +{ + IINCHIP_WRITE(RTR0,(uint8)((timeout & 0xff00) >> 8)); + IINCHIP_WRITE((RTR0 + 1),(uint8)(timeout & 0x00ff)); +} + + +/** +@brief This function set the number of Retransmission. + +If there is no response from the peer or delay in response then recorded time +as per RTR & RCR register seeting then time out will occur. +*/ +void setRCR(uint8 retry) +{ + IINCHIP_WRITE(RCR,retry); +} + + +/** +@brief This function set the interrupt mask Enable/Disable appropriate Interrupt. ('1' : interrupt enable) + +If any bit in IMR is set as '0' then there is not interrupt signal though the bit is +set in IR register. +*/ +void setIMR(uint8 mask) +{ + IINCHIP_WRITE(IMR,mask); // must be setted 0x10. +} + + +/** +@brief These below functions are used to get the Gateway, SubnetMask + and Source Hardware Address (MAC Address) and Source IP address +*/ +void getGAR(uint8 * addr) +{ + addr[0] = IINCHIP_READ(GAR0); + addr[1] = IINCHIP_READ(GAR0+1); + addr[2] = IINCHIP_READ(GAR0+2); + addr[3] = IINCHIP_READ(GAR0+3); +} +void getSUBR(uint8 * addr) +{ + addr[0] = IINCHIP_READ(SUBR0); + addr[1] = IINCHIP_READ(SUBR0+1); + addr[2] = IINCHIP_READ(SUBR0+2); + addr[3] = IINCHIP_READ(SUBR0+3); +} +void getSHAR(uint8 * addr) +{ + addr[0] = IINCHIP_READ(SHAR0); + addr[1] = IINCHIP_READ(SHAR0+1); + addr[2] = IINCHIP_READ(SHAR0+2); + addr[3] = IINCHIP_READ(SHAR0+3); + addr[4] = IINCHIP_READ(SHAR0+4); + addr[5] = IINCHIP_READ(SHAR0+5); +} +void getSIPR(uint8 * addr) +{ + addr[0] = IINCHIP_READ(SIPR0); + addr[1] = IINCHIP_READ(SIPR0+1); + addr[2] = IINCHIP_READ(SIPR0+2); + addr[3] = IINCHIP_READ(SIPR0+3); +} + + +/** +@brief These below functions are used to get the Destination Hardware Address (MAC Address), Destination IP address and Destination Port. +*/ +void getSn_DHAR(SOCKET s, uint8 * addr) +{ + addr[0] = IINCHIP_READ(Sn_DHAR0(s)); + addr[1] = IINCHIP_READ(Sn_DHAR0(s)+1); + addr[2] = IINCHIP_READ(Sn_DHAR0(s)+2); + addr[3] = IINCHIP_READ(Sn_DHAR0(s)+3); + addr[4] = IINCHIP_READ(Sn_DHAR0(s)+4); + addr[5] = IINCHIP_READ(Sn_DHAR0(s)+5); +} +void setSn_DHAR(SOCKET s, uint8 * addr) +{ + IINCHIP_WRITE((Sn_DHAR0(s) + 0),addr[0]); + IINCHIP_WRITE((Sn_DHAR0(s) + 1),addr[1]); + IINCHIP_WRITE((Sn_DHAR0(s) + 2),addr[2]); + IINCHIP_WRITE((Sn_DHAR0(s) + 3),addr[3]); + IINCHIP_WRITE((Sn_DHAR0(s) + 4),addr[4]); + IINCHIP_WRITE((Sn_DHAR0(s) + 5),addr[5]); +} +void getSn_DIPR(SOCKET s, uint8 * addr) +{ + addr[0] = IINCHIP_READ(Sn_DIPR0(s)); + addr[1] = IINCHIP_READ(Sn_DIPR0(s)+1); + addr[2] = IINCHIP_READ(Sn_DIPR0(s)+2); + addr[3] = IINCHIP_READ(Sn_DIPR0(s)+3); +} +void setSn_DIPR(SOCKET s, uint8 * addr) +{ + IINCHIP_WRITE((Sn_DIPR0(s) + 0),addr[0]); + IINCHIP_WRITE((Sn_DIPR0(s) + 1),addr[1]); + IINCHIP_WRITE((Sn_DIPR0(s) + 2),addr[2]); + IINCHIP_WRITE((Sn_DIPR0(s) + 3),addr[3]); +} +void getSn_DPORT(SOCKET s, uint8 * addr) +{ + addr[0] = IINCHIP_READ(Sn_DPORT0(s)); + addr[1] = IINCHIP_READ(Sn_DPORT0(s)+1); +} +void setSn_DPORT(SOCKET s, uint8 * addr) +{ + IINCHIP_WRITE((Sn_DPORT0(s) + 0),addr[0]); + IINCHIP_WRITE((Sn_DPORT0(s) + 1),addr[1]); +} + + +/** +@brief This sets the maximum segment size of TCP in Active Mode), while in Passive Mode this is set by peer +*/ +void setSn_MSS(SOCKET s, uint16 Sn_MSSR0) +{ + IINCHIP_WRITE(Sn_MSSR0(s),(uint8)((Sn_MSSR0 & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_MSSR0(s) + 1),(uint8)(Sn_MSSR0 & 0x00ff)); +} + +void setSn_TTL(SOCKET s, uint8 ttl) +{ + IINCHIP_WRITE(Sn_TTL(s), ttl); +} + + +/** +@brief These below function is used to setup the Protocol Field of IP Header when + executing the IP Layer RAW mode. +*/ +void setSn_PROTO(SOCKET s, uint8 proto) +{ + IINCHIP_WRITE(Sn_PROTO(s),proto); +} + + +/** +@brief get socket interrupt status + +These below functions are used to read the Interrupt & Soket Status register +*/ +uint8 getSn_IR(SOCKET s) +{ + return IINCHIP_READ(Sn_IR(s)); +} + + +/** +@brief get socket status +*/ +uint8 getSn_SR(SOCKET s) +{ + return IINCHIP_READ(Sn_SR(s)); +} + + +/** +@brief get socket TX free buf size + +This gives free buffer size of transmit buffer. This is the data size that user can transmit. +User shuold check this value first and control the size of transmitting data +*/ +uint16 getSn_TX_FSR(SOCKET s) +{ + uint16 val=0,val1=0; + do + { + val1 = IINCHIP_READ(Sn_TX_FSR0(s)); + val1 = (val1 << 8) + IINCHIP_READ(Sn_TX_FSR0(s) + 1); + if (val1 != 0) + { + val = IINCHIP_READ(Sn_TX_FSR0(s)); + val = (val << 8) + IINCHIP_READ(Sn_TX_FSR0(s) + 1); + } + } while (val != val1); + return val; +} + + +/** +@brief get socket RX recv buf size + +This gives size of received data in receive buffer. +*/ +uint16 getSn_RX_RSR(SOCKET s) +{ + uint16 val=0,val1=0; + do + { + val1 = IINCHIP_READ(Sn_RX_RSR0(s)); + val1 = (val1 << 8) + IINCHIP_READ(Sn_RX_RSR0(s) + 1); + if(val1 != 0) + { + val = IINCHIP_READ(Sn_RX_RSR0(s)); + val = (val << 8) + IINCHIP_READ(Sn_RX_RSR0(s) + 1); + } + } while (val != val1); + return val; +} + + +/** +@brief This function is being called by send() and sendto() function also. + +This function read the Tx write pointer register and after copy the data in buffer update the Tx write pointer +register. User should read upper byte first and lower byte later to get proper value. +*/ +void send_data_processing(SOCKET s, uint8 *data, uint16 len) +{ + uint16 ptr; + ptr = IINCHIP_READ(Sn_TX_WR0(s)); + ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_TX_WR0(s) + 1); + write_data(s, data, (uint8 *)(ptr), len); + ptr += len; + IINCHIP_WRITE(Sn_TX_WR0(s),(uint8)((ptr & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_TX_WR0(s) + 1),(uint8)(ptr & 0x00ff)); +} + + +/** +@brief This function is being called by recv() also. + +This function read the Rx read pointer register +and after copy the data from receive buffer update the Rx write pointer register. +User should read upper byte first and lower byte later to get proper value. +*/ +void recv_data_processing(SOCKET s, uint8 *data, uint16 len) +{ + uint16 ptr; + ptr = IINCHIP_READ(Sn_RX_RD0(s)); + ptr = ((ptr & 0x00ff) << 8) + IINCHIP_READ(Sn_RX_RD0(s) + 1); +#ifdef __DEF_IINCHIP_DBG__ + printf("ISR_RX: rd_ptr : %.4x\r\n", ptr); +#endif + read_data(s, (uint8 *)ptr, data, len); // read data + ptr += len; + IINCHIP_WRITE(Sn_RX_RD0(s),(uint8)((ptr & 0xff00) >> 8)); + IINCHIP_WRITE((Sn_RX_RD0(s) + 1),(uint8)(ptr & 0x00ff)); +} + + +/** +@brief for copy the data form application buffer to Transmite buffer of the chip. + +This function is being used for copy the data form application buffer to Transmite +buffer of the chip. It calculate the actual physical address where one has to write +the data in transmite buffer. Here also take care of the condition while it exceed +the Tx memory uper-bound of socket. +*/ +void write_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len) +{ + uint16 size; + uint16 dst_mask; + uint8 * dst_ptr; + + dst_mask = (uint16)dst & getIINCHIP_TxMASK(s); + dst_ptr = (uint8 *)(getIINCHIP_TxBASE(s) + dst_mask); + + if (dst_mask + len > getIINCHIP_TxMAX(s)) + { + size = getIINCHIP_TxMAX(s) - dst_mask; + wiz_write_buf((uint16)dst_ptr, (uint8*)src, size); + src += size; + size = len - size; + dst_ptr = (uint8 *)(getIINCHIP_TxBASE(s)); + wiz_write_buf((uint16)dst_ptr, (uint8*)src, size); + } + else + { + wiz_write_buf((uint16)dst_ptr, (uint8*)src, len); + } +} + + +/** +@brief This function is being used for copy the data form Receive buffer of the chip to application buffer. + +It calculate the actual physical address where one has to read +the data from Receive buffer. Here also take care of the condition while it exceed +the Rx memory uper-bound of socket. +*/ +void read_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len) +{ + uint16 size; + uint16 src_mask; + uint8 * src_ptr; + + src_mask = (uint16)src & getIINCHIP_RxMASK(s); + src_ptr = (uint8 *)(getIINCHIP_RxBASE(s) + src_mask); + + if( (src_mask + len) > getIINCHIP_RxMAX(s) ) + { + size = getIINCHIP_RxMAX(s) - src_mask; + wiz_read_buf((uint16)src_ptr, (uint8*)dst,size); + dst += size; + size = len - size; + src_ptr = (uint8 *)(getIINCHIP_RxBASE(s)); + wiz_read_buf((uint16)src_ptr, (uint8*) dst,size); + } + else + { + wiz_read_buf((uint16)src_ptr, (uint8*) dst,len); + } +} + + +#ifdef __DEF_IINCHIP_PPP__ +#define PPP_OPTION_BUF_LEN 64 + +uint8 pppinit_in(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen); + + +/** +@brief make PPPoE connection +@return 1 => success to connect, 2 => Auth fail, 3 => timeout, 4 => Auth type not support + +*/ +uint8 pppinit(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen) +{ + uint8 ret; + uint8 isr; + + // PHASE0. W5100 PPPoE(ADSL) setup + // enable pppoe mode + printf("-- PHASE 0. W5100 PPPoE(ADSL) setup process --\r\n"); + printf("\r\n"); + IINCHIP_WRITE(MR,IINCHIP_READ(MR) | MR_PPPOE); + + // open socket in pppoe mode + isr = IINCHIP_READ(Sn_IR(0));// first clear isr(0), W5100 at present time + IINCHIP_WRITE(Sn_IR(0),isr); + + IINCHIP_WRITE(PTIMER,200); // 5sec timeout + IINCHIP_WRITE(PMAGIC,0x01); // magic number + IINCHIP_WRITE(Sn_MR(0),Sn_MR_PPPOE); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_OPEN); + + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + + ret = pppinit_in(id, idlen, passwd, passwdlen); + + // close ppp connection socket + /* +200801 (hwkim) */ + close(0); + /* ------- */ + + return ret; +} + + +uint8 pppinit_in(uint8 * id, uint8 idlen, uint8 * passwd, uint8 passwdlen) +{ + uint8 loop_idx = 0; + uint8 isr = 0; + uint8 buf[PPP_OPTION_BUF_LEN]; + uint16 len; + uint8 str[PPP_OPTION_BUF_LEN]; + uint8 str_idx,dst_idx; + + // PHASE1. PPPoE Discovery + // start to connect pppoe connection + printf("-- PHASE 1. PPPoE Discovery process --"); + printf(" ok\r\n"); + printf("\r\n"); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCON); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + + wait_10ms(100); + + loop_idx = 0; + //check whether PPPoE discovery end or not + while (!(IINCHIP_READ(Sn_IR(0)) & Sn_IR_PNEXT)) + { + printf("."); + if (loop_idx++ == 10) // timeout + { + printf("timeout before LCP\r\n"); + return 3; + } + wait_10ms(100); + } + + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + + // PHASE2. LCP process + printf("-- PHASE 2. LCP process --"); + + // send LCP Request + { + // Magic number option + // option format (type value + length value + data) + // write magic number value + buf[0] = 0x05; // type value + buf[1] = 0x06; // length value + buf[2] = 0x01; buf[3] = 0x01; buf[4] = 0x01; buf[5]= 0x01; // data + // for MRU option, 1492 0x05d4 + // buf[6] = 0x01; buf[7] = 0x04; buf[8] = 0x05; buf[9] = 0xD4; + } + send_data_processing(0, buf, 0x06); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send request + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + + wait_10ms(100); + + while (!((isr = IINCHIP_READ(Sn_IR(0))) & Sn_IR_PNEXT)) + { + if (isr & Sn_IR_PRECV) // Not support option + { + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), Sn_IR_PRECV); + /*---*/ + len = getSn_RX_RSR(0); + if ( len > 0 ) + { + recv_data_processing(0, str, len); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + + // for debug + //printf("LCP proc\r\n"); for (i = 0; i < len; i++) printf ("%02x ", str[i]); printf("\r\n"); + // get option length + len = str[4]; len = ((len & 0x00ff) << 8) + str[5]; + len += 2; + str_idx = 6; dst_idx = 0; // ppp header is 6 byte, so starts at 6. + do + { + if ((str[str_idx] == 0x01) || (str[str_idx] == 0x02) || (str[str_idx] == 0x03) || (str[str_idx] == 0x05)) + { + // skip as length of support option. str_idx+1 is option's length. + str_idx += str[str_idx+1]; + } + else + { + // not support option , REJECT + memcpy((uint8 *)(buf+dst_idx), (uint8 *)(str+str_idx), str[str_idx+1]); + dst_idx += str[str_idx+1]; str_idx += str[str_idx+1]; + } + } while (str_idx != len); + // for debug + // printf("LCP dst proc\r\n"); for (i = 0; i < dst_idx; i++) printf ("%02x ", dst[i]); printf("\r\n"); + + // send LCP REJECT packet + send_data_processing(0, buf, dst_idx); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCJ); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + } + } + printf("."); + if (loop_idx++ == 10) // timeout + { + printf("timeout after LCP\r\n"); + return 3; + } + wait_10ms(100); + } + printf(" ok\r\n"); + printf("\r\n"); + + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + + printf("-- PHASE 3. PPPoE(ADSL) Authentication mode --\r\n"); + printf("Authentication protocol : %.2x %.2x, ", IINCHIP_READ(PATR0), IINCHIP_READ(PATR0+1)); + + loop_idx = 0; + if (IINCHIP_READ(PATR0) == 0xc0 && IINCHIP_READ(PATR0+1) == 0x23) + { + printf("PAP\r\n"); // in case of adsl normally supports PAP. + // send authentication data + // copy (idlen + id + passwdlen + passwd) + buf[loop_idx] = idlen; loop_idx++; + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(id), idlen); loop_idx += idlen; + buf[loop_idx] = passwdlen; loop_idx++; + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(passwd), passwdlen); loop_idx += passwdlen; + send_data_processing(0, buf, loop_idx); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_10ms(100); + } + else if (IINCHIP_READ(PATR0) == 0xc2 && IINCHIP_READ(PATR0+1) == 0x23) + { + uint8 chal_len; + md5_ctx context; + uint8 digest[16]; + + len = getSn_RX_RSR(0); + if ( len > 0 ) + { + recv_data_processing(0, str, len); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ +#ifdef __DEF_IINCHIP_DBG__ + printf("recv CHAP\r\n"); + { + int16 i; + + for (i = 0; i < 32; i++) + printf ("%02x ", str[i]); + } + printf("\r\n"); +#endif +// str is C2 23 xx CHAL_ID xx xx CHAP_LEN CHAP_DATA +// index 0 1 2 3 4 5 6 7 ... + + memset(buf,0x00,64); + buf[loop_idx] = str[3]; loop_idx++; // chal_id + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(passwd), passwdlen); loop_idx += passwdlen; //passwd + chal_len = str[6]; // chal_id + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(str+7), chal_len); loop_idx += chal_len; //challenge + buf[loop_idx] = 0x80; +#ifdef __DEF_IINCHIP_DBG__ + printf("CHAP proc d1\r\n"); + { + int16 i; + for (i = 0; i < 64; i++) + printf ("%02x ", buf[i]); + } + printf("\r\n"); +#endif + + md5_init(&context); + md5_update(&context, buf, loop_idx); + md5_final(digest, &context); + +#ifdef __DEF_IINCHIP_DBG__ + printf("CHAP proc d1\r\n"); + { + int16 i; + for (i = 0; i < 16; i++) + printf ("%02x", digest[i]); + } + printf("\r\n"); +#endif + loop_idx = 0; + buf[loop_idx] = 16; loop_idx++; // hash_len + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(digest), 16); loop_idx += 16; // hashed value + memcpy((uint8 *)(buf+loop_idx), (uint8 *)(id), idlen); loop_idx += idlen; // id + send_data_processing(0, buf, loop_idx); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_10ms(100); + } + } + else + { + printf("Not support\r\n"); +#ifdef __DEF_IINCHIP_DBG__ + printf("Not support PPP Auth type: %.2x%.2x\r\n",IINCHIP_READ(PATR0), IINCHIP_READ(PATR0+1)); +#endif + return 4; + } + printf("\r\n"); + + printf("-- Waiting for PPPoE server's admission --"); + loop_idx = 0; + while (!((isr = IINCHIP_READ(Sn_IR(0))) & Sn_IR_PNEXT)) + { + if (isr & Sn_IR_PFAIL) + { + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + printf("failed\r\nReinput id, password..\r\n"); + return 2; + } + printf("."); + if (loop_idx++ == 10) // timeout + { + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + printf("timeout after PAP\r\n"); + return 3; + } + wait_10ms(100); + } + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + printf("ok\r\n"); + printf("\r\n"); + printf("-- PHASE 4. IPCP process --"); + // IP Address + buf[0] = 0x03; buf[1] = 0x06; buf[2] = 0x00; buf[3] = 0x00; buf[4] = 0x00; buf[5] = 0x00; + send_data_processing(0, buf, 6); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_10ms(100); + + loop_idx = 0; + while (1) + { + if (IINCHIP_READ(Sn_IR(0)) & Sn_IR_PRECV) + { + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + len = getSn_RX_RSR(0); + if ( len > 0 ) + { + recv_data_processing(0, str, len); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_RECV); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + //for debug + //printf("IPCP proc\r\n"); for (i = 0; i < len; i++) printf ("%02x ", str[i]); printf("\r\n"); + str_idx = 6; dst_idx = 0; + if (str[2] == 0x03) // in case of NAK + { + do + { + if (str[str_idx] == 0x03) // request only ip information + { + memcpy((uint8 *)(buf+dst_idx), (uint8 *)(str+str_idx), str[str_idx+1]); + dst_idx += str[str_idx+1]; str_idx += str[str_idx+1]; + } + else + { + // skip byte + str_idx += str[str_idx+1]; + } + // for debug + //printf("s: %d, d: %d, l: %d", str_idx, dst_idx, len); + } while (str_idx != len); + send_data_processing(0, buf, dst_idx); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send ipcp request + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_10ms(100); + break; + } + } + } + printf("."); + if (loop_idx++ == 10) // timeout + { + printf("timeout after IPCP\r\n"); + return 3; + } + wait_10ms(100); + send_data_processing(0, buf, 6); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); //ipcp re-request + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + } + + loop_idx = 0; + while (!(IINCHIP_READ(Sn_IR(0)) & Sn_IR_PNEXT)) + { + printf("."); + if (loop_idx++ == 10) // timeout + { + printf("timeout after IPCP NAK\r\n"); + return 3; + } + wait_10ms(100); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PCR); // send ipcp request + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + } + /* +200801[bj] clear interrupt value*/ + IINCHIP_WRITE(Sn_IR(0), 0xff); + /*---*/ + printf("ok\r\n"); + printf("\r\n"); + return 1; + // after this function, User must save the pppoe server's mac address and pppoe session id in current connection +} + + +/** +@brief terminate PPPoE connection +*/ +uint8 pppterm(uint8 * mac, uint8 * sessionid) +{ + uint16 i; + uint8 isr; +#ifdef __DEF_IINCHIP_DBG__ + printf("pppterm()\r\n"); +#endif + /* Set PPPoE bit in MR(Common Mode Register) : enable socket0 pppoe */ + IINCHIP_WRITE(MR,IINCHIP_READ(MR) | MR_PPPOE); + + // write pppoe server's mac address and session id + // must be setted these value. + for (i = 0; i < 6; i++) IINCHIP_WRITE((Sn_DHAR0(0)+i),mac[i]); + for (i = 0; i < 2; i++) IINCHIP_WRITE((Sn_DPORT0(0)+i),sessionid[i]); + isr = IINCHIP_READ(Sn_IR(0)); + IINCHIP_WRITE(Sn_IR(0),isr); + + //open socket in pppoe mode + IINCHIP_WRITE(Sn_MR(0),Sn_MR_PPPOE); + IINCHIP_WRITE(Sn_CR(0),Sn_CR_OPEN); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_1us(1); + // close pppoe connection + IINCHIP_WRITE(Sn_CR(0),Sn_CR_PDISCON); + /* +20071122[chungs]:wait to process the command... */ + while( IINCHIP_READ(Sn_CR(0)) ) + ; + /* ------- */ + wait_10ms(100); + // close socket + /* +200801 (hwkim) */ + close(0); + /* ------- */ + + +#ifdef __DEF_IINCHIP_DBG__ + printf("pppterm() end ..\r\n"); +#endif + + return 1; +} +#endif diff --git a/Tangible/w5100.h b/Tangible/w5100.h new file mode 100755 index 0000000..c90a979 --- /dev/null +++ b/Tangible/w5100.h @@ -0,0 +1,299 @@ +/* +@file w5100.h +*/ + +#ifndef _W5100_H_ +#define _W5100_H_ + + +#define MR __DEF_IINCHIP_MAP_BASE__ +#define IDM_OR ((__DEF_IINCHIP_MAP_BASE__ + 0x00)) +#define IDM_AR0 ((__DEF_IINCHIP_MAP_BASE__ + 0x01)) +#define IDM_AR1 ((__DEF_IINCHIP_MAP_BASE__ + 0x02)) +#define IDM_DR ((__DEF_IINCHIP_MAP_BASE__ + 0x03)) + + +/** + @brief Gateway IP Register address + */ +#define GAR0 (COMMON_BASE + 0x0001) +/** + @brief Subnet mask Register address + */ +#define SUBR0 (COMMON_BASE + 0x0005) +/** + @brief Source MAC Register address + */ +#define SHAR0 (COMMON_BASE + 0x0009) +/** + @brief Source IP Register address + */ +#define SIPR0 (COMMON_BASE + 0x000F) +/** + @brief Interrupt Register + */ +#define IR (COMMON_BASE + 0x0015) +/** + @brief Interrupt mask register + */ +#define IMR (COMMON_BASE + 0x0016) +/** + @brief Timeout register address( 1 is 100us ) + */ +#define RTR0 (COMMON_BASE + 0x0017) +/** + @brief Retry count reigster + */ +#define RCR (COMMON_BASE + 0x0019) +/** + @brief Receive memory size reigster + */ +#define RMSR (COMMON_BASE + 0x001A) +/** + @brief Transmit memory size reigster + */ +#define TMSR (COMMON_BASE + 0x001B) +/** + @brief Authentication type register address in PPPoE mode + */ +#define PATR0 (COMMON_BASE + 0x001C) +//#define PPPALGO (COMMON_BASE + 0x001D) +#define PTIMER (COMMON_BASE + 0x0028) +#define PMAGIC (COMMON_BASE + 0x0029) + +/** + @brief Unreachable IP register address in UDP mode + */ +#define UIPR0 (COMMON_BASE + 0x002A) +/** + @brief Unreachable Port register address in UDP mode + */ +#define UPORT0 (COMMON_BASE + 0x002E) + +/** + @brief socket register +*/ +#define CH_BASE (COMMON_BASE + 0x0400) +/** + @brief size of each channel register map + */ +#define CH_SIZE 0x0100 +/** + @brief socket Mode register + */ +#define Sn_MR(ch) (CH_BASE + ch * CH_SIZE + 0x0000) +/** + @brief channel Sn_CR register + */ +#define Sn_CR(ch) (CH_BASE + ch * CH_SIZE + 0x0001) +/** + @brief channel interrupt register + */ +#define Sn_IR(ch) (CH_BASE + ch * CH_SIZE + 0x0002) +/** + @brief channel status register + */ +#define Sn_SR(ch) (CH_BASE + ch * CH_SIZE + 0x0003) +/** + @brief source port register + */ +#define Sn_PORT0(ch) (CH_BASE + ch * CH_SIZE + 0x0004) +/** + @brief Peer MAC register address + */ +#define Sn_DHAR0(ch) (CH_BASE + ch * CH_SIZE + 0x0006) +/** + @brief Peer IP register address + */ +#define Sn_DIPR0(ch) (CH_BASE + ch * CH_SIZE + 0x000C) +/** + @brief Peer port register address + */ +#define Sn_DPORT0(ch) (CH_BASE + ch * CH_SIZE + 0x0010) +/** + @brief Maximum Segment Size(Sn_MSSR0) register address + */ +#define Sn_MSSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0012) +/** + @brief Protocol of IP Header field register in IP raw mode + */ +#define Sn_PROTO(ch) (CH_BASE + ch * CH_SIZE + 0x0014) + +/** + @brief IP Type of Service(TOS) Register + */ +#define Sn_TOS(ch) (CH_BASE + ch * CH_SIZE + 0x0015) +/** + @brief IP Time to live(TTL) Register + */ +#define Sn_TTL(ch) (CH_BASE + ch * CH_SIZE + 0x0016) + +/** + @brief Transmit free memory size register + */ +#define Sn_TX_FSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0020) +/** + @brief Transmit memory read pointer register address + */ +#define Sn_TX_RD0(ch) (CH_BASE + ch * CH_SIZE + 0x0022) +/** + @brief Transmit memory write pointer register address + */ +#define Sn_TX_WR0(ch) (CH_BASE + ch * CH_SIZE + 0x0024) +/** + @brief Received data size register + */ +#define Sn_RX_RSR0(ch) (CH_BASE + ch * CH_SIZE + 0x0026) +/** + @brief Read point of Receive memory + */ +#define Sn_RX_RD0(ch) (CH_BASE + ch * CH_SIZE + 0x0028) +/** + @brief Write point of Receive memory + */ +#define Sn_RX_WR0(ch) (CH_BASE + ch * CH_SIZE + 0x002A) + + + +/* MODE register values */ +#define MR_RST 0x80 /**< reset */ +#define MR_PB 0x10 /**< ping block */ +#define MR_PPPOE 0x08 /**< enable pppoe */ +#define MR_LB 0x04 /**< little or big endian selector in indirect mode */ +#define MR_AI 0x02 /**< auto-increment in indirect mode */ +#define MR_IND 0x01 /**< enable indirect mode */ + +/* IR register values */ +#define IR_CONFLICT 0x80 /**< check ip confict */ +#define IR_UNREACH 0x40 /**< get the destination unreachable message in UDP sending */ +#define IR_PPPoE 0x20 /**< get the PPPoE close message */ +#define IR_SOCK(ch) (0x01 << ch) /**< check socket interrupt */ + +/* Sn_MR values */ +#define Sn_MR_CLOSE 0x00 /**< unused socket */ +#define Sn_MR_TCP 0x01 /**< TCP */ +#define Sn_MR_UDP 0x02 /**< UDP */ +#define Sn_MR_IPRAW 0x03 /**< IP LAYER RAW SOCK */ +#define Sn_MR_MACRAW 0x04 /**< MAC LAYER RAW SOCK */ +#define Sn_MR_PPPOE 0x05 /**< PPPoE */ +#define Sn_MR_ND 0x20 /**< No Delayed Ack(TCP) flag */ +#define Sn_MR_MULTI 0x80 /**< support multicating */ + + +/* Sn_CR values */ +#define Sn_CR_OPEN 0x01 /**< initialize or open socket */ +#define Sn_CR_LISTEN 0x02 /**< wait connection request in tcp mode(Server mode) */ +#define Sn_CR_CONNECT 0x04 /**< send connection request in tcp mode(Client mode) */ +#define Sn_CR_DISCON 0x08 /**< send closing reqeuset in tcp mode */ +#define Sn_CR_CLOSE 0x10 /**< close socket */ +#define Sn_CR_SEND 0x20 /**< updata txbuf pointer, send data */ +#define Sn_CR_SEND_MAC 0x21 /**< send data with MAC address, so without ARP process */ +#define Sn_CR_SEND_KEEP 0x22 /**< send keep alive message */ +#define Sn_CR_RECV 0x40 /**< update rxbuf pointer, recv data */ + +#ifdef __DEF_IINCHIP_PPP__ + #define Sn_CR_PCON 0x23 + #define Sn_CR_PDISCON 0x24 + #define Sn_CR_PCR 0x25 + #define Sn_CR_PCN 0x26 + #define Sn_CR_PCJ 0x27 +#endif + +/* Sn_IR values */ +#ifdef __DEF_IINCHIP_PPP__ + #define Sn_IR_PRECV 0x80 + #define Sn_IR_PFAIL 0x40 + #define Sn_IR_PNEXT 0x20 +#endif +#define Sn_IR_SEND_OK 0x10 /**< complete sending */ +#define Sn_IR_TIMEOUT 0x08 /**< assert timeout */ +#define Sn_IR_RECV 0x04 /**< receiving data */ +#define Sn_IR_DISCON 0x02 /**< closed socket */ +#define Sn_IR_CON 0x01 /**< established connection */ + +/* Sn_SR values */ +#define SOCK_CLOSED 0x00 /**< closed */ +#define SOCK_INIT 0x13 /**< init state */ +#define SOCK_LISTEN 0x14 /**< listen state */ +#define SOCK_SYNSENT 0x15 /**< connection state */ +#define SOCK_SYNRECV 0x16 /**< connection state */ +#define SOCK_ESTABLISHED 0x17 /**< success to connect */ +#define SOCK_FIN_WAIT 0x18 /**< closing state */ +#define SOCK_CLOSING 0x1A /**< closing state */ +#define SOCK_TIME_WAIT 0x1B /**< closing state */ +#define SOCK_CLOSE_WAIT 0x1C /**< closing state */ +#define SOCK_LAST_ACK 0x1D /**< closing state */ +#define SOCK_UDP 0x22 /**< udp socket */ +#define SOCK_IPRAW 0x32 /**< ip raw mode socket */ +#define SOCK_MACRAW 0x42 /**< mac raw mode socket */ +#define SOCK_PPPOE 0x5F /**< pppoe socket */ + +/* IP PROTOCOL */ +#define IPPROTO_IP 0 /**< Dummy for IP */ +#define IPPROTO_ICMP 1 /**< Control message protocol */ +#define IPPROTO_IGMP 2 /**< Internet group management protocol */ +#define IPPROTO_GGP 3 /**< Gateway^2 (deprecated) */ +#define IPPROTO_TCP 6 /**< TCP */ +#define IPPROTO_PUP 12 /**< PUP */ +#define IPPROTO_UDP 17 /**< UDP */ +#define IPPROTO_IDP 22 /**< XNS idp */ +#define IPPROTO_ND 77 /**< UNOFFICIAL net disk protocol */ +#define IPPROTO_RAW 255 /**< Raw IP packet */ + + +/********************************************************* +* iinchip access function +*********************************************************/ +extern uint8 IINCHIP_READ(uint16 addr); +extern uint8 IINCHIP_WRITE(uint16 addr,uint8 data); +extern uint16 wiz_read_buf(uint16 addr, uint8* buf,uint16 len); +extern uint16 wiz_write_buf(uint16 addr,uint8* buf,uint16 len); + +extern void iinchip_init(void); // reset iinchip +extern void sysinit(uint8 tx_size, uint8 rx_size); // setting tx/rx buf size +extern uint8 getISR(uint8 s); +extern void putISR(uint8 s, uint8 val); +extern uint16 getIINCHIP_RxMAX(uint8 s); +extern uint16 getIINCHIP_TxMAX(uint8 s); +extern uint16 getIINCHIP_RxMASK(uint8 s); +extern uint16 getIINCHIP_TxMASK(uint8 s); +extern uint16 getIINCHIP_RxBASE(uint8 s); +extern uint16 getIINCHIP_TxBASE(uint8 s); +extern void setGAR(uint8 * addr); // set gateway address +extern void setSUBR(uint8 * addr); // set subnet mask address +extern void setSHAR(uint8 * addr); // set local MAC address +extern void setSIPR(uint8 * addr); // set local IP address +extern void setRTR(uint16 timeout); // set retry duration for data transmission, connection, closing ... +extern void setRCR(uint8 retry); // set retry count (above the value, assert timeout interrupt) +extern void setIMR(uint8 mask); // set interrupt mask. +extern void getGAR(uint8 * addr); +extern void getSUBR(uint8 * addr); +extern void getSHAR(uint8 * addr); +extern void getSIPR(uint8 * addr); +extern uint8 getIR( void ); +extern void setSn_MSS(SOCKET s, uint16 Sn_MSSR0); // set maximum segment size +extern void setSn_PROTO(SOCKET s, uint8 proto); // set IP Protocol value using IP-Raw mode +extern uint8 getSn_IR(SOCKET s); // get socket interrupt status +extern uint8 getSn_SR(SOCKET s); // get socket status +extern uint16 getSn_TX_FSR(SOCKET s); // get socket TX free buf size +extern uint16 getSn_RX_RSR(SOCKET s); // get socket RX recv buf size +extern void setSn_DHAR(SOCKET s, uint8 * addr); +extern void setSn_DIPR(SOCKET s, uint8 * addr); +extern void setSn_DPORT(SOCKET s, uint8 * addr); +extern void getSn_DHAR(SOCKET s, uint8 * addr); +extern void getSn_DIPR(SOCKET s, uint8 * addr); +extern void getSn_DPORT(SOCKET s, uint8 * addr); +extern void setSn_TTL(SOCKET s, uint8 ttl); +extern void setMR(uint8 val); + +#ifdef __DEF_IINCHIP_PPP__ +extern uint8 pppinit(uint8 *id, uint8 idlen, uint8 *passwd, uint8 passwdlen); +extern uint8 pppterm(uint8 *mac,uint8 *sessionid); +#endif + +extern void send_data_processing(SOCKET s, uint8 *data, uint16 len); +extern void recv_data_processing(SOCKET s, uint8 *data, uint16 len); +extern void read_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len); +extern void write_data(SOCKET s, vuint8 * src, vuint8 * dst, uint16 len); + +#endif -- libgit2 0.21.2