From 6da8f34ee5a11043e0afb78b4a2e9cf918d9b0de Mon Sep 17 00:00:00 2001
From: Amaury <amaury.knockaert@polytech-lille.net>
Date: Sun, 7 May 2017 13:36:47 +0200
Subject: [PATCH] dézippage de Test IMA3 P2

---
 code arduino/Test IMA3 P2/test/test.ino               | 36 ++++++++++++++++++++++++++++++++++++
 code arduino/Test IMA3 P2/testCapteur/testCapteur.ino | 42 ++++++++++++++++++++++++++++++++++++++++++
 code arduino/test_arduino.zip                         | Bin 1724 -> 0 bytes
 3 files changed, 78 insertions(+), 0 deletions(-)
 create mode 100644 code arduino/Test IMA3 P2/test/test.ino
 create mode 100644 code arduino/Test IMA3 P2/testCapteur/testCapteur.ino
 delete mode 100644 code arduino/test_arduino.zip

diff --git a/code arduino/Test IMA3 P2/test/test.ino b/code arduino/Test IMA3 P2/test/test.ino
new file mode 100644
index 0000000..90f3907
--- /dev/null
+++ b/code arduino/Test IMA3 P2/test/test.ino
@@ -0,0 +1,36 @@
+/* Utilisation du capteur Ultrason HC-SR04 */
+
+// définition des broches utilisées
+int trig1 = 7;
+int echo1 = 6;
+
+int trig2 = 8;
+int echo2 = 5;
+long lecture_echo;
+long cm;
+
+void setup()
+{
+  pinMode(trig1, OUTPUT);
+  digitalWrite(trig1, LOW);
+  pinMode(echo1, INPUT);
+  
+  pinMode(trig2, OUTPUT);
+  digitalWrite(trig2, LOW);
+  pinMode(echo2, INPUT);
+  Serial.begin(9600);
+}
+
+void loop()
+{
+  digitalWrite(trig1, HIGH);
+  digitalWrite(trig2, HIGH);
+  delayMicroseconds(10);
+  digitalWrite(trig1, LOW);
+  digitalWrite(trig2, LOW);
+  lecture_echo = pulseIn(echo2, HIGH);
+  cm = lecture_echo / 58;
+  Serial.print("Distancem : ");
+  Serial.println(cm);
+  delay(500);
+}
diff --git a/code arduino/Test IMA3 P2/testCapteur/testCapteur.ino b/code arduino/Test IMA3 P2/testCapteur/testCapteur.ino
new file mode 100644
index 0000000..44bbf1e
--- /dev/null
+++ b/code arduino/Test IMA3 P2/testCapteur/testCapteur.ino
@@ -0,0 +1,42 @@
+  #include "Adafruit_BME280.h"
+  #include "Adafruit_Sensor.h"
+  //Library allows either I2C or SPI, so include both.
+  #include "Wire.h"
+  #include "SPI.h"
+   
+  BME280 capteur;
+   
+  void setup() {
+   
+     Serial.begin(9600);
+    while (!Serial) {
+      // Attente de l'ouverture du port série pour Arduino LEONARDO
+    }
+    //configuration du capteur
+    capteur.settings.commInterface = I2C_MODE; 
+    capteur.settings.I2CAddress = 0x76;
+    capteur.settings.runMode = 3; 
+    capteur.settings.tStandby = 0;
+    capteur.settings.filter = 0;
+    capteur.settings.tempOverSample = 1 ;
+    capteur.settings.pressOverSample = 1;
+    capteur.settings.humidOverSample = 1;
+   
+    Serial.println("Starting BME280... ");
+    delay(10);  // attente de la mise en route du capteur. 2 ms minimum
+    // chargement de la configuration du capteur
+    capteur.begin();
+  }
+   
+  void loop() {
+    Serial.print("Température: ");
+    Serial.print(capteur.readTempC(), 2);
+    Serial.print(" °C");
+    Serial.print("\t Pression: ");
+    Serial.print(capteur.readFloatPressure(), 2);
+    Serial.print(" Pa");
+    Serial.print("\t humidité relative : ");
+    Serial.print(capteur.readFloatHumidity(), 2);
+    Serial.println(" %");
+    delay(1000);
+  }
diff --git a/code arduino/test_arduino.zip b/code arduino/test_arduino.zip
deleted file mode 100644
index fa65957..0000000
Binary files a/code arduino/test_arduino.zip and /dev/null differ
--
libgit2 0.21.2